Tag: M.W=300-400

Formula: Al2H8O13S3. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Synthesis of hydrated aluminum sulfate from kaolin using microwave energy. Author is Park, Seong Soo; Hwang, Eun Hee; Park, Hee Chan.

Hydrated aluminum sulfate, an inorganic polymer, was synthesized from kaolin in H2SO4 solution using microwave energy. The maximum rates of alumina extracted from calcined kaolin were 72.8% in a conventional process (80°, 1M, and 180 min) and 99.9% in a microwave process (90°, 1M, and 60 min). Compared with the conventional one, the hydrated aluminum sulfate synthesized under the microwave process had layer structure consisting of plate-shaped large grains. After synthesis and then calcination at 1100°, both products in conventional and microwave processes were γ-Al2O3 with agglomerated powders of spherical shape. The specific area of the products in conventional and microwave processes were 113.5 and 106.6 m2/g, and their average grain sizes were 46.5 and 26.3 μm, resp.

From this literature《Synthesis of hydrated aluminum sulfate from kaolin using microwave energy》,we know some information about this compound(17927-65-0)Formula: Al2H8O13S3, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Water pollution in sake industry. VI. Treatment of the polluted water discharged at the rice washing by addition of iron, published in 1972, which mentions a compound: 17927-65-0, Name is Aluminum(III) sulfate xhydrate, Molecular Al2H8O13S3, Application of 17927-65-0.

Suspended substances (SS) in the polluted water were coagulated by the addition of polyaluminum chloride (PAC) solution and Al2(SO4)3.16-18H2O, or FeCl2.xH2O, or FeSO4.7H2O, or Fe2(SO4)3.xH2O solution FeCl3 was most effective for removal of SS and COD. Addition of <200 ppm Fe3+ resulted in a residue of >10 ppm Fe3+ in the treated water. Successive addition of FeCl3, polyacrylamides (PAA), PAC, and PAA to the polluted water, followed by stirring and pH adjustment at 7.0 resulted in a rapid coagulation and almost all SS and >95% of COD were removed and residual Fe became <0.1 ppm. From this literature《Water pollution in sake industry. VI. Treatment of the polluted water discharged at the rice washing by addition of iron》,we know some information about this compound(17927-65-0)Application of 17927-65-0, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Solubility and solid phases in the sulfuric acid-sodium sulfate-aluminum sulfate-water system at 50°, published in 1987-02-28, which mentions a compound: 17927-65-0, Name is Aluminum(III) sulfate xhydrate, Molecular Al2H8O13S3, Name: Aluminum(III) sulfate xhydrate.

Solubility and composition of the solid phases in the H2SO4-Na2SO4-Al2(SO4)3-H2O system were determined for H2SO4 concentrations of 3-12 weight%. Under the given conditions Na2SO4, NaAl(SO4)2.12H2O and Al2(SO4)3.17H2O crystallize.

From this literature《Solubility and solid phases in the sulfuric acid-sodium sulfate-aluminum sulfate-water system at 50°》,we know some information about this compound(17927-65-0)Name: Aluminum(III) sulfate xhydrate, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: Aluminum(III) sulfate xhydrate( cas:17927-65-0 ) is researched.COA of Formula: Al2H8O13S3.Hilal, Nidal; Busca, Gerald; Talens-Alesson, Federico; Atkin, Brian P. published the article 《Treatment of waste coolants by coagulation and membrane filtration》 about this compound( cas:17927-65-0 ) in Chemical Engineering and Processing. Keywords: waste coolant coagulation membrane filtration. Let’s learn more about this compound (cas:17927-65-0).

The treatment of waste coolant (Mobilcut 232) from cutting tools was studied by 3 processes. The 1st pre-treatment process, coagulation was tested using 4 conventional industrial coagulants, Al sulfate hydrate, Al chloride, Fe sulfate pentahydrate and Fe chloride. The 2nd process was filtering the supernatant produced from the 1st stage using 2 nanofiltration membranes of 500 and 2000 Da. The 3rd process used ultrafiltration method using a 100,000 Da membrane. The critical coagulation concentration of the different coagulants was determined and the quality of the supernatant was compared to the permeate produced by ultrafiltration. The parameters compared were TOC, absorbance at 400 nm and pH. The performances of both nanofiltration membranes were evaluated. The surface morphol. and pore size distribution of the NF and UF membranes were studied with an at. force microscope.

From this literature《Treatment of waste coolants by coagulation and membrane filtration》,we know some information about this compound(17927-65-0)COA of Formula: Al2H8O13S3, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 17927-65-0, is researched, Molecular Al2H8O13S3, about Image analysis of floc size distribution induced by two different impellers, the main research direction is image analysis floc size distribution impeller water.HPLC of Formula: 17927-65-0.

The goal is to analyze the relation between characteristic floc size and hydrodynamics. The 1st question concerned the relation between an average floc size and the viscous dissipation of kinetic energy. A series of flocculation experiments was conducted in a mixing tank with 2 impellers (a Rushton turbine and a Lightnin A310 impeller) for equivalent dissipated power conditions. The average floc size depended on the global dissipation rate whatever the impeller type. However, the floc size distributions are significantly different for each impeller. This difference can be explained by the spatial distribution of the dissipation rate of the turbulent kinetic energy, which depends on impeller type. The 2nd question concerned the dependence of the floc size to the history of mixing. The flocculation experiments show that the floc size distributions was reproducible once the flocs had been submitted to the highest velocity gradient.

From this literature《Image analysis of floc size distribution induced by two different impellers》,we know some information about this compound(17927-65-0)HPLC of Formula: 17927-65-0, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

SDS of cas: 17927-65-0. Aromatic compounds can be divided into two categories: single heterocycles and fused heterocycles. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Solid solution between Al-ettringite and Fe-ettringite (Ca6[Al1-xFex(OH)6]2(SO4)3·26H2O). Author is Moschner, Goril; Lothenbach, Barbara; Winnefeld, Frank; Ulrich, Andrea; Figi, Renato; Kretzschmar, Ruben.

The solid solution between Al- and Fe-ettringite Ca6[Al1-xFex(OH)6]2(SO4)3·26H2O was investigated. Ettringite phases were synthesized at different Al/(Al + Fe)-ratios (= XAl,total), so that XAl increased from 0.0 to 1.0 in 0.1 unit steps. After 8 mo of equilibration, the solid phases were analyzed by X-ray diffraction (XRD) and thermogravimetric anal. (TGA), while the aqueous solutions were analyzed by inductively coupled plasma optical emission spectroscopy (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS). XRD analyses of the solid phases indicated the existence of a miscibility gap between XAl,total = 0.3-0.6. Some of the XRD reflections showed two overlapping peaks at these molar ratios. The composition of the aqueous solutions, however, would have been in agreement with both, the existence of a miscibility gap or a continuous solid solution between Al- and Fe-ettringite, based on thermodn. modeling, simulating the exptl. conditions.

From this literature《Solid solution between Al-ettringite and Fe-ettringite (Ca6[Al1-xFex(OH)6]2(SO4)3·26H2O)》,we know some information about this compound(17927-65-0)SDS of cas: 17927-65-0, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

COA of Formula: Al2H8O13S3. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Chitosan dressings containing inorganic additives and levofloxacin as potential wound care products with enhanced hemostatic properties.

Despite the progress in the development of hemostatic products, efficient treatment solutions to control hemorrhage upon wounding are still necessary. Chitosan (CS) is a natural hydrogel-forming polysaccharide, easy to modify for specific applications. Inorganic compounds in turn possess documented hemostatic properties. In this study, innovative hemostatic products based on CS, containing the inorganic additives aluminum chloride, aluminum sulfate hydrate or iron(III) sulfate and the antibiotic Levofloxacin were prepared, and their potential use as hemostatic materials was investigated. Structural characteristics, phys. state and drug loading/release properties were examined Strong interactions developed between CS and the additives, the pore size in the resulting products was affected, swelling increased up to 2500% and the stability of the wound dressings improved. The crystallinity of Levofloxacin reduced, and its release was immediate. The materials showed biocompatibility upon contact with cultured keratinocytes, hemocompatibility and hemostatic efficacy in vitro and in vivo.

From this literature《Chitosan dressings containing inorganic additives and levofloxacin as potential wound care products with enhanced hemostatic properties》,we know some information about this compound(17927-65-0)COA of Formula: Al2H8O13S3, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Rigobello, Eliane Sloboda; Dantas, Angela Di Bernardo; Di Bernardo, Luiz; Vieira, Eny Maria published the article 《Influence of the apparent molecular size of aquatic humic substances on color removal by coagulation and filtration》. Keywords: humic substance mol size influence coagulation filtration removing color.They researched the compound: Aluminum(III) sulfate xhydrate( cas:17927-65-0 ).COA of Formula: Al2H8O13S3. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:17927-65-0) here.

This study aims to verify the influence of the apparent mol. size of aquatic humic substances (AHSs) on the effectiveness of coagulation with Al sulfate and ferric chloride. Coagulation-filtration tests using the jar test and bench-scale sand filters were carried out with H2O samples having a true color of ∼100 Hazen units and prepared with AHSs of different mol. sizes. Stability diagrams are presented showing regions of ≥ 90% and ≥ 95% apparent color removal delineated for each H2O sample using plots of total metal ion concentration (Al3+ and Fe3+) vs. coagulation pH. To achieve the same degree of color removal, the H2O samples with smaller apparent mol. sizes and a higher percentage of fulvic acids required higher dosages of both Al sulfate and ferric chloride.

From this literature《Influence of the apparent molecular size of aquatic humic substances on color removal by coagulation and filtration》,we know some information about this compound(17927-65-0)COA of Formula: Al2H8O13S3, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Alumina-coated hollow glass spheres/alumina composites, published in 1997-11-15, which mentions a compound: 17927-65-0, mainly applied to alumina coating glass hollow sphere, Electric Literature of Al2H8O13S3.

Coating of alumina onto the surface of hollow glass spheres was accomplished by controlled heterogeneous precipitation from aqueous solutions The processing conditions were optimized to yield thin and uniform precursor coatings. After calcination, converting the precursor to alumina, the alumina-coated hollow glass spheres formed free-flowing powders that were used to produce glass sphere/alumina matrix composites with up to 35 vol% of controlled and well-dispersed closed porosity. The dielec. constants and the flexural strengths of such porous composites were determined as a function of porosity.

From this literature《Alumina-coated hollow glass spheres/alumina composites》,we know some information about this compound(17927-65-0)Electric Literature of Al2H8O13S3, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Reference of Aluminum(III) sulfate xhydrate. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Thermal decomposition of aluminum sulfate and hafnium sulfate. Author is Papazian, H. A.; Pizzolato, P. J.; Orrell, R. R..

The thermal decomposition of Al2(SO4)3.-nH2O and Hf(SO4)2.4H23 was studied in air by thermogravimetry and in vacuum by simultaneous thermogravimetry and evolved-gas analysis. No SO2 was detected by the mass spectrometer. The primary products of decomposition appear to be SO and O2 for both sulfates. For the Al salt, the Arrhenius relationship shows 2 activation energies, whereas for the Hf salt there is only 1 activation energy in vacuum and 2 activation energies in air. X-ray data show the solid products of the reactions to be η-Al2O3 and HfO2. The diffraction pattern for Hf(SO4)2.4H2O is presented.

From this literature《Thermal decomposition of aluminum sulfate and hafnium sulfate》,we know some information about this compound(17927-65-0)Reference of Aluminum(III) sulfate xhydrate, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com