Tag: 822-82-2

822-82-2, Isothiazole-4-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

822-82-2, To a solution of l-[4-[ethyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrinnidin-5-iunn-2-yl]azetidin-3-ol (5.0 mg, 14 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (2.7 mg in 0.2 mL DCE, 21 muiotatauiotaomicronIota), DMAP (0.52 mg in 0.1 mL DCE, 4.3 muiotatauiotaomicronIota) and EDAC (4.1 mg in 0.1 mL DCE, 21 muiotatauiotaomicronIota). The mixture was shaken at 50 C for 20 minutes before it was concentrated in vacuo. Prep HPLC purification (basic) afforded the title compound as colorless oil. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.52 – 5.45 (m, 1H), 4.84 – 4.68 (m, 1H), 4.53 – 4.40 (m, 2H), 4.13 (dd, 2H), 3.97 (td, J = 11.2, 4.3 Hz, 2H), 3.71 – 3.56 (m, 2H), 3.51 – 3.43 (m, 1H), 3.43 – 3.34 (m, 2H), 3.25 – 3.18 (m, 1H), 3.07 – 2.97 (m, 2H), 1.95 – 1.82 (m, 2H), 1.75 (d, J = 12.3 Hz, 1H), 1.62 (d, 1H), 1.19 (t, J = 6.9 Hz, 3H). HPLC-Retention time (XE Metode 7 CM) : 1.95 minutes. Detected “M + l”-mass: 464.15.

822-82-2 Isothiazole-4-carboxylic acid 12430656, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.822-82-2,Isothiazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.

822-82-2, solution of 1 ,2-thiazole-4-carboxylic acid (36 mg, 0.28 mmol) and HATU (105 mg, 0,28 mmol) in DMA (1 mL) was added to a mixture of N-{4-[4-oxo-3-(phenylamino)-4,5,6,7- tetrahydro-1 H-pyrrolo[2,3-c]pyridin-2-yl]pyridin-2-yl}acetamide (24; 50 mg, 0.14 mmol) and DIPEA (48 pL, 0.28 mmol) in DMA (1 mL) and stirred for 16 h at 50X. The mixture was concentrated and purified by preparative HPLC (basic method) to give the title compound (37 mg, 54%). 1H-NMR (400 MHz, DMSO-d6), delta [ppm]= 2.08 (3H), 4.14+4.34 (2H), 4.90+5.08 (2H), 6.58 (2H), 6.60 (1 H), 7.03 (2H), 7.21 (1 H), 7.45 (1 H), 8.13 (1 H), 8.23+8.29 (1 H), 8.71 +8.80 (1 H), 9.35+9.45 (1 H), 10.41 (1 H), 12.07+12.36 (1 H)

822-82-2 Isothiazole-4-carboxylic acid 12430656, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; GRAHAM, Keith; KLAR, Ulrich; BRIEM, Hans; SIEMEISTER, Gerhard; MOeNNING, Ursula; VON NUSSBAUM, Franz; (332 pag.)WO2017/102649; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.822-82-2,Isothiazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.,822-82-2

To a solution of l-[4-[propyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrimidin-5-ium-2-yl]azetidin-3-ol (5.0 mg, 14 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (2.6 mg in 0.2 mL DCE, 20 muiotatauiotaomicronIota), DMAP (0.5 mg in 0.1 mL DCE, 4.1 muiotatauiotaomicronIota) and EDAC (3.9 mg in 0.2 mL DCE, 20 muiotatauiotaomicronIota). The mixture was shaken at room temperature overnight before it was concentrated in vacuo. Prep HPLC purification (basic) afforded the title compound as colorless oil. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.49 (tt, J = 6.6, 3.9 Hz, 1H), 4.88 – 4.65 (m, 1H), 4.54 – 4.39 (m, 2H), 4.13 (dd, 2H), 3.96 (td, J = 11.3, 4.3 Hz, 2H), 3.54 – 3.35 (m, 5H), 3.25 – 3.16 (m, 1H), 3.07 – 2.97 (m, 2H), 1.95 – 1.82 (m, 2H), 1.74 (d, 1H), 1.65 – 1.54 (m, 3H), 0.90 (t, J = 7.3 Hz, 3H). HPLC-Retention time (XE Metode 7 CM) : 2.03 minutes. Detected “M + l”-mass: 478.15.

As the paragraph descriping shows that 822-82-2 is playing an increasingly important role.

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

822-82-2, Isothiazole-4-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of Example 9b (0.19 M in N,N-dimethylacetamide, 237 muL, 0.045 mmol), N,N-diisopropylethylamine (0.21 M in N,N-dimethylacetamide, 262 muL, 0.055 mmol), HATU (0.21 M in N,N-dimethylacetamide, 238 muL, 0.05 mmol), and isothiazole-4-carboxylic acid (0.4M in N,N-dimethylacetamide, 125 muL, 0.05 mmol) were aspirated from their respective source vials, mixed through a perfluoroalkoxy alkanes mixing tube (0.2 mm inner diameter), and loaded into an injection loop. The reaction segment was injected into the flow reactor (Hastelloy coil, 0.75 mm inner diameter, 1.8 mL internal volume) set at 100 C., and passed through the reactor at 180 muL min-1 (10 minute residence time). Upon exiting the reactor, the reaction was loaded directly into an injection loop and purified using preparative HPLC to yield the title compound (9.95 mg, 49.50% yield). Samples were purified by preparative HPLC on a Phenomenex Luna C8 (2) 5 mum 100 AXIA column (50 mm¡Á21.2 mm). A gradient of acetonitrile (A) and 0.1% trifluoroacetic acid in water (B) was used, at a flow rate of 30 mL/min (0-0.5 minutes 5% A, 0.5-6.5 minutes linear gradient 5-60% A, 6.5-7.0 minutes linear gradient 60-100% A, 7.0-8.9 minutes 100% A, 8.9-9.0 minutes linear gradient 100-5% A, 9.0-10 minutes 5% A). A sample volume of 1.0 mL was injected directly from the flow reactor stream to the HPLC system. A custom purification system was used, consisting of the following modules: Gilson 305 and 306 pumps; Gilson 806 Manometric module; Gilson UV/Vis 155 detector; Gilson 506C interface box; Gilson FC204 fraction collector; Agilent G1968D Active Splitter; Thermo MSQ Plus mass spectrometer. The system was controlled through a combination of Thermo Xcalibur 2.0.7 software and a custom application written in-house using Microsoft Visual Basic 6.0. 1H NMR (400 MHz, DMSO-d6) delta 4.69 (d, J=3.9 Hz, 2H), 5.62 (s, 2H), 6.43 (s, 1H), 6.84 (d, J=2.0 Hz, 1H), 7.51 (d, J=2.0 Hz, 1H), 8.18 (s, 1H), 8.32 (s, 1H), 8.96 (s, 1H), 9.59 (s, 1H). MS (APCI) m/z 439.1 [M+H]+.

The synthetic route of 822-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; AbbVie Inc.; Dai, Yujia; McClellan, William; Michaelides, Mike; Sweis, Ramzi; Wilson, Noel; Dietrich, Justin; (90 pag.)US2017/174688; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

822-82-2, Isothiazole-4-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of l-[4-[methyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7-dihydro- thieno[3,2-d]pyrimidin-5-ium-2-yl]azetidin-3-ol (5.0 mg, 15 muiotatauiotaomicronIota) in DCE (0.2 mL) was added solutions of 4-isothiazolecarboxylic acid (3.6 mg in 0.2 mL DCE, 28 muiotatauiotaomicronIota), DMAP (3.4 mg in 0.1 mL DCE, 28 muiotatauiotaomicronIota) and EDAC (5.3 mg in 0.2 mL DCE, 28 muiotatauiotaomicronIota) . The mixture was shaken at 50 C for 1 hour before it was concentrated in vacuo. Prep HPLC purification (acidic) afforded the title compound. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 9.00 (s, 1H), 5.53 – 5.44 (m, 1H), 4.93 – 4.79 (m, 1H), 4.48 (dd, J = 10.4, 6.7 Hz, 2H), 4.16 (dd, J = 10.7, 3.8 Hz, 2H), 4.01 – 3.93 (m, 2H), 3.53 – 3.45 (m, 1H), 3.43 – 3.37 (m, 2H), 3.25 – 3.20 (m, 1H), 3.19 (s, 3H), 3.10 – 2.97 (m, 2H), 1.92 – 1.79 (m, 2H), 1.69 – 1.54 (m, 2H).HPLC-Retention time (XE Metode 7 CM) : 1.88 minutes.Detected “M + l”-mass: 450.12.

As the paragraph descriping shows that 822-82-2 is playing an increasingly important role.

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

822-82-2, Isothiazole-4-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of isothiazole-4-carboxylic acid (1.70 g, 12.98 mmol) in THF (17 ml) was added t-BuLi (29.95 mL) at -78 C, and then a solution of CBr4 (8.62 g, 25.96 mmol) in THF (10 ml) was added dropwise. The mixture was stirred at -78 C for 2 h, quenched with addition of saturated aqueous NH4Cl and extracted with EtOAc (50 mL x 3). The aqueous layer was adjusted to pH ~1.5 by addition of HCl, and then extracted with EtOAc (50 mL x 3). The combined organic layers were dried over MgSO4, filtered, and concentrated in vacuo providing the title compound (1.50 g), which was used without further purification.

As the paragraph descriping shows that 822-82-2 is playing an increasingly important role.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; LIVERTON, Nigel; BESHORE, Douglas, C.; KUDUK, Scott, D.; LUO, Yunfu; MENG, Na; YU, Tingting; WO2015/20930; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com