New learning discoveries about 94594-90-8

As the paragraph descriping shows that 94594-90-8 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.94594-90-8,(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide,as a common compound, the synthetic route is as follows.

Example 3Step 1. Synthesis of (3aS,6R,7aR)-1 -methaciotayloyl-8,8-dimethylhexahydro-3a,6-methano-2,1- benzisothiazole 2,2-dioxide.(1 S)-(-)-2,10-camphorsultamProcedure: To a solution of the (1S)-(-)-2,10-camphorsultam (5.00Og, 23.22 mmoles) in anhydrous THF (50ml) at -20¡ã C was added lithium chloride (1.08g, 25.5 mmoles, – small balls), triethylamine (4.21 ml, 30.2 mmoles, 1.30 equivalents.) and then the mixture was allowed to stir for 10 minutes. The lithium chloride did not go into solution. 2-methylacrylic anhydride (4.15 ml, 27.9 mmoles, 1.20 equivalents.) in THF (15ml) was then added. The internal temperature varied between -20¡ã C and -10¡ã C during addition which took about 5 minutes. The thick white mixture was stirred within the cooling bath and allowed to reach room temperature. After stirring overnight the white heterogeneous reaction mixture was added to 350ml of water with stirring. The white crystalline solid (3aS,6R,7aR)-1 -methacryloyl-8,8- dimethylhexahydro-3a,6-methano-2,1-benzisothiazole 2,2-dioxide (6.302g, 96percent yield) was collected and dried under vacuum.-Analytical HPLC run with a Vydac 218TP54 C18 reverse phase column run with solvents A: 0.1percent trifluoroacetic acid in H2O and B: 0.1percent trifluoroacetic acid in acetonitrile. Gradient (0 to 100percentB) over 22 minutes. Retention time 18.166 min (100percent).Optical rotation = 0.02Og in 2ml; c=0.01g/ml (C= 1 (CHCI3)}; measurement -0.226; optical rotation = – 0.226×4000/10 = – 90.4.Combustion Anal sis:Steps 2 through 5 were performed as in Example 2., 94594-90-8

As the paragraph descriping shows that 94594-90-8 is playing an increasingly important role.

Reference£º
Patent; PFIZER PRODUCTS INC.; WO2008/65503; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Simple exploration of 94594-90-8

94594-90-8 (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide 6916014, aisothiazole compound, is more and more widely used in various fields.

94594-90-8, (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 2(R)-5-Methyl-4,5-dihydro-pyrazole-1 ,5-dicarboxylic acid 1 -[(4-chloro-phenyl)-amide] 5-{[2-fluoro-4- (2-oxo-2H-pyridin-1-yl)-phenyl]-amide}Step 1. Synthesis of (3aS,6R,7aR)-1-methacryloyl-8,8-dimethylhexahydro-3a,6-methano-2,1- benzisothiazole 2,2-dioxide(1 S)-(-)-2,10-camphorsultamProcedure: To a solution of (1S)-(-)-2,10-camphorsultam (1.160g, 5.388 mmoles) in toluene (10ml) was added sodium hydride (60percent in oil, 0.323g, 8.08 mmoles). Stirred for 1.5 hours Added methacryoyl chloride (1.126g, 10.78 mmoles) directly to the reaction mixture. Stirred at room temperature overnight, Evaporated, extracted into ethylacetate, washed with 1 N HCI, dried MgSO4, evaporated in vacuo and purified by chromatography (0-20percent EtOAc in hexane) to afford the desired compound (1.24Og, 81percent) 1 H NMR (400 MHz, DMSO-D6) delta ppm 0.90 (s, 3 H), 1.08 (s, 3 H), 1.23 (m 1 H), 1.42 (m, 1 H), 1.78 (m, 5 H), 1.81 (m, 3H), 3.26 (s, 4 H), 3.56 (d, J=14.04 Hz, 1 H), 3.77 (d, J=14.04 Hz, 1 H)1 3.91 (m, 1 H), 5.48 (s, 1 H)1 5.60 (s,1 H), 94594-90-8

94594-90-8 (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide 6916014, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; PFIZER PRODUCTS INC.; WO2008/65503; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Share a compound : 94594-90-8

As the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,94594-90-8

Take 30 g of the resulting intermediate, add 250 mL of dichloromethane. After stirring to clarify,37 g of camphorsulfonamide and 9. 6 g of N, N’-4-dimethylaminopyridine (DMAP) were added and the reaction was cooled to 10 ¡ã C. A solution of 75 g of N, N’-dicyclohexylcarbodiimide (DCC) and 50 mL of DCM was added dropwise, and the temperature of the dropping process was below 20 ¡ã C. After completion of the dropwise addition, the reaction was carried out at 20 ¡ã C to 25 ¡ã C for 18 hours. After completion of the reaction, the reaction solution was filtered and the resulting filtrate was washed once with 50 mL of water and once with 25 mL of saturated brine. After the dichloromethane phase was concentrated, 300 mL of n-heptane was added to precipitate a solid. Filtered and then dried to give 56 g of a solid, 99.8percent purity, 91percent yield.

As the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

Reference£º
Patent; Dalian Honkai Chemical Development Co., Ltd; Sun, Liquan; Zhao, xinjun; Feng, Yan-shu; Gao, Hanrong; cornille, Fabrice; Canevotti, Renato; (12 pag.)CN106588841; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about 94594-90-8

With the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,94594-90-8

In a round-bottomed flask, 80 g of (1S)-(-)-2,10-camphorsultam, 236.4 g of methyl tert-butyl ether, 2.27 g of 4-(dimethylamino)-pyridine and 41.36 g of triethylamine were placed, and to this, 63.46 g of capryloyl chloride was added dropwise at room temperature. After stirring for 1 hour, the reaction solution was added to a mixed solution of 7.75 g of 35percent hydrochloric acid and 200 g of water, and the organic layer was separated. The organic layer was washed with 25percent aqueous sodium hydroxide solution and subsequently with water, and concentrated under reduced pressure. Thus, 125.34 g of the titled compound was obtained (quality: 99.7percent measured by GC).Gas chromatography analysis was carried out using Shimadzu GC-14A (Column: 5percent Silicone OV-17 manufactured by GL Science, Detector: FID).

With the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

Reference£º
Patent; Yamazaki, Shigeya; Hosoya, Takeshi; US2009/118542; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Introduction of a new synthetic route about (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide

With the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,94594-90-8

Example 3Step 1. Synthesis of (3aS,6R,7aR)-1 -methaciotayloyl-8,8-dimethylhexahydro-3a,6-methano-2,1- benzisothiazole 2,2-dioxide.(1 S)-(-)-2,10-camphorsultamProcedure: To a solution of the (1S)-(-)-2,10-camphorsultam (5.00Og, 23.22 mmoles) in anhydrous THF (50ml) at -20¡ã C was added lithium chloride (1.08g, 25.5 mmoles, – small balls), triethylamine (4.21 ml, 30.2 mmoles, 1.30 equivalents.) and then the mixture was allowed to stir for 10 minutes. The lithium chloride did not go into solution. 2-methylacrylic anhydride (4.15 ml, 27.9 mmoles, 1.20 equivalents.) in THF (15ml) was then added. The internal temperature varied between -20¡ã C and -10¡ã C during addition which took about 5 minutes. The thick white mixture was stirred within the cooling bath and allowed to reach room temperature. After stirring overnight the white heterogeneous reaction mixture was added to 350ml of water with stirring. The white crystalline solid (3aS,6R,7aR)-1 -methacryloyl-8,8- dimethylhexahydro-3a,6-methano-2,1-benzisothiazole 2,2-dioxide (6.302g, 96percent yield) was collected and dried under vacuum.-Analytical HPLC run with a Vydac 218TP54 C18 reverse phase column run with solvents A: 0.1percent trifluoroacetic acid in H2O and B: 0.1percent trifluoroacetic acid in acetonitrile. Gradient (0 to 100percentB) over 22 minutes. Retention time 18.166 min (100percent).Optical rotation = 0.02Og in 2ml; c=0.01g/ml (C= 1 (CHCI3)}; measurement -0.226; optical rotation = – 0.226×4000/10 = – 90.4.Combustion Anal sis:Steps 2 through 5 were performed as in Example 2.

With the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

Reference£º
Patent; PFIZER PRODUCTS INC.; WO2008/65503; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

 

Some tips on 94594-90-8

94594-90-8 (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide 6916014, aisothiazole compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.94594-90-8,(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide,as a common compound, the synthetic route is as follows.

[00124] [3aS-[1(E),3a,6,7a]]-1-[3-(3,4-difluorophenyl)-1-oxo-2-propenyl]-hexahydro-8,8-dimethyl-3H-3a,6-methano-2,l-benzisothiazole-2,2-dioxide: At 0-5 0C, a solution of 3-(3,4-difluoro-phenyl)-acryloyl chloride in dichloromethane (30 mL) was added to a mixture of (2R)-bornane-10,2-sultam (14.5 g, 67.35 mmol, 1.00 equiv), triethylamine (20.4 g, 201.98 mmol, 3.00 equiv), and dichloromethane (120 mL). The resulting solution was stirred at ambient temperature for about 3 hours and then water (40 mL) was added. Standard extractive workup with dichloromethane (2 x 40 mL) gave the title product as an off-white solid (18.5 g; yield = 72 percent). 1H NMR (300 MHz, CDCl3) delta: 7.68 (d, / = 15.6 Hz, 1 H), 7.15- 7.45 (m, 3 H), 7.19 (d, J = 15.6 Hz, 1 H), 4.00 (m, 1 H), 3.55 (q, J1 =13.8 Hz, J2 = 24.0 Hz ), 2.18 (m, 2 H), 1.93 (m, 2 H), 1.37-1.48 (m, 2 H), 1.22 (s, 3 H), 0.96 (s, 3 H).

94594-90-8 (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide 6916014, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; AUSPEX PHARMACEUTICALS, INC.; RAO, Tadimeti; ZHANG, Chengzhi; WO2011/17108; (2011); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Brief introduction of 94594-90-8

The synthetic route of 94594-90-8 has been constantly updated, and we look forward to future research findings.

94594-90-8, (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Take 30 g of the resulting intermediate, add 250 mL of dichloromethane. After stirring to clarify,37 g of camphorsulfonamide and 9. 6 g of N, N’-4-dimethylaminopyridine (DMAP) were added and the reaction was cooled to 10 ¡ã C. A solution of 75 g of N, N’-dicyclohexylcarbodiimide (DCC) and 50 mL of DCM was added dropwise, and the temperature of the dropping process was below 20 ¡ã C. After completion of the dropwise addition, the reaction was carried out at 20 ¡ã C to 25 ¡ã C for 18 hours. After completion of the reaction, the reaction solution was filtered and the resulting filtrate was washed once with 50 mL of water and once with 25 mL of saturated brine. After the dichloromethane phase was concentrated, 300 mL of n-heptane was added to precipitate a solid. Filtered and then dried to give 56 g of a solid, 99.8percent purity, 91percent yield.

The synthetic route of 94594-90-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Dalian Honkai Chemical Development Co., Ltd; Sun, Liquan; Zhao, xinjun; Feng, Yan-shu; Gao, Hanrong; cornille, Fabrice; Canevotti, Renato; (12 pag.)CN106588841; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com