Category: 18480-53-0

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO22,mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

2.1. Synthesis of ethyl 3,4-dichloroisothiazole-5-carboxylate: 15 g of 3,4-dichloroisothiazole-5-carboxylic acid (75.7 mmol) were dissolved in 300 ml of ethanol and 8.4 ml of concentrated sulphuric acid were added. The mixture was stirred under reflux for 20 h. The reaction mixture was then concentrated to half the original volume, neutralized with saturated NaHC03, added to water and extracted with dichloromethane. The dichloromethane phases were dried and carefully concentrated on a rotary evaporator. Yield: 15.2 g (89percent of theory).’H-NMR (400 MHz, CDC13delta, ppm) 4.44 (q,2H), 1.42 (tr,3H).

With the synthetic route has been constantly updated, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid,belong isothiazole compound

Reference£º
Patent; BAYER CROPSCIENCE AKTIENGESELLSCHAFT; TIEBES, Joerg; MOSRIN, Marc; REY, Jullien; DOeLLER, Uwe; DROeGE, Thomas; MAECHLING, Simon; SCHMIDT, Jan Peter; TELSER, Joachim; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; BERNIER, David; CRISTAU, Pierre; TSUCHIYA, Tomoki; (180 pag.)WO2016/102420; (2016); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid, and cas is 18480-53-0, its synthesis route is as follows.,18480-53-0

To a suspension of 3,4-dichloroisothiazole-5-carboxylic acid (0.15 g, 0.76 mmol) in oxalyl chloride (2 mL) was added a catalytic amount of dimethylformamide (2 drops) and the mixture was heated to 80¡ã C. and stirred for 2 h. The excess oxalyl chloride was removed on the rotary evaporator. Meanwhile, 5-fluoro-2-(4-fluorobenzyloxy)-pyrimidin-4-ylamine (0.17 g, 0.68 mmol) was dissolved in THF (1 mL), treated with LiHMDS (1M in THF, 0.76 mL, 0.76 mmol) and stirred for 10 min. The freshly prepared 3,4-dichlorothiazole-5-carbonyl chloride*, dissolved in THF (1 mL), was added and the reaction was capped and stirred for 12 h. The reaction was diluted with water and the target compound was extracted with CH2Cl2 (3.x.5 mL). The combined extracts were dried over MgSO4 and then evaporated under reduced pressure. The mixture was eluted with CH2Cl2 through an anionic-exchange solid phase extraction column and then further purified by reverse-phase chromatography to give 3,4-dichloroisothiazole-5-carboxylic acid [5-fluoro-2-(4-fluorobenzyloxy)pyrimidin-4-yl]amide (0.035 g, 12percent) as a tan solid: mp 87-90¡ã C.; 1H NMR (400 MHz, DMSO-d6) delta 11.78 (s, 1H), 8.67 (s, 1H), 7.51-7.48 (m, 2H), 7.24-7.19 (m, 2H), 5.25 (s, 2H); MS (ESI) m/z 417 (M+H)+, 415 (M-H)-. *Nagata, T.; Kogure, A.; Yonekura, N.; Hanai, R.; Kaneko, I.; Nakano, Y. JP 2007211002 A

With the complex challenges of chemical substances, we look forward to future research findings about 18480-53-0,belong isothiazole compound

Reference£º
Patent; DOW AGROSCIENCES LLC; US2009/203647; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,18480-53-0

1.1. Synthesis of 3,4-dichloro-N-(cyclohexylmethyl)isothiazole-5-carboxamide: 730 mg of 3,4-dichloroisothiazole-5-carboxylic acid (3.7 mmol) were dissolved in 10 ml of dichloromethane and a drop of dimethylformamide was added. 1.4 g of oxalyl chloride (11.1 – – mmol) were added dropwise at room temperature. After stirring for 1 h at room temperature, the solution was evaporated to dryness on a rotary evaporator. The residue was taken up in 3 ml of dichloromethane and slowly added dropwise to a solution of 626 mg of 1 – cyclohexylmethanamine (5.5 mmol) and 746 mg of triethylamine (7.4 mmol) in 10 ml of dichloromethane. The mixture was stirred at room temperature for 1 h. The reaction mixture was then added to water and extracted repeatedly with dichloromethane. The concentrated extracts were dried over MgS04, concentrated and purified by column chromatography. Yield: 1.05 g (97percent of theory).’H-NMR (400 MHz, CDC13delta, ppm) 6.86 (br,lH), 3.34 (tr,2H), 1.77 (m,4H), 1.66 (m,lH), 1.58 (m,lH), 1.3-1.15 (m,3H), 1.0 (m,2H).

With the rapid development of chemical substances, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid

Reference£º
Patent; BAYER CROPSCIENCE AKTIENGESELLSCHAFT; TIEBES, Joerg; MOSRIN, Marc; REY, Jullien; DOeLLER, Uwe; DROeGE, Thomas; MAECHLING, Simon; SCHMIDT, Jan Peter; TELSER, Joachim; SCHMUTZLER, Dirk; DIETRICH, Hansjoerg; GATZWEILER, Elmar; ROSINGER, Christopher Hugh; BERNIER, David; CRISTAU, Pierre; TSUCHIYA, Tomoki; (180 pag.)WO2016/102420; (2016); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belong isothiazole compound,3,4-Dichloroisothiazole-5-carboxylic acid,18480-53-0,Molecular formula: C4HCl2NO2S,mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

3,4-Dichloroisothiazol-5-carboxylic acid (0.235 g, 1.2 mmol), dichloromethane (6 ml), N,N-dimethylformamide (2 drops) were added dropwise to the reaction flask. Add oxalyl chloride (1 g, 8 mmol),The reaction solution was stirred at room temperature for 4 hours.The solvent was then evaporated to give 3,4-dichloroisothiazol-5-carbonyl chloride, which was dissolved in dichloromethane (2 mL).Then 4-fluoro-2-(2-pentyloxy)aniline (0.197 g, 1 mmol) was added to the reaction flask and triethylamine (0.13 mL) was added.Further, a 3,4-dichloroisothiazol-5-formyl chloride solution was added dropwise to the reaction flask, and the mixture was stirred at room temperature for 16 hours.Then after monitoring the reaction by thin layer chromatography,Water was added to the reaction mixture, and the mixture was extracted with ethyl acetate.The organic layer was washed with saturated brine.After drying over anhydrous sodium sulfate, it was concentrated under reduced pressure.The residue was purified by column chromatography (eluent: petroleum ether: ethyl acetate = 20:1).Obtained a fresh yellow solid of 0.236 g.The yield was 62.76percent.

With the synthetic route has been constantly updated, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid,belong isothiazole compound

Reference£º
Patent; Shanghai Taihe International Trade Co., Ltd.; Ma Wenjing; Lv Liang; Li Hongwei; Hou Shuang; Du Yonglei; Liu Jiyong; (31 pag.)CN108383791; (2018); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid, and cas is 18480-53-0, its synthesis route is as follows.,18480-53-0

15 g of 3,4-dichloroisothiazole-5-carboxylic acid (75.7 mmol) were dissolved in 300 ml of ethanol and 8.4 ml of concentrated sulphuric acid were added. The mixture was stirred under reflux for 20 h. The reaction mixture was then concentrated to half the original volume, neutralized with saturated NaHCO3, added to water and extracted with dichloromethane. The dichloromethane phases were dried and carefully concentrated on a rotary evaporator. Yield:15.2 g (89percent of theory).?H-NMR (400 MHz, CDC13 3, ppm) 4.44 (q, 2H), 1.42 (tr, 3H).

With the complex challenges of chemical substances, we look forward to future research findings about 18480-53-0,belong isothiazole compound

Reference£º
Patent; BAYER CROPSCIENCE AKTIENGESELLSCHAFT; BERNIER, David; CRISTAU, Pierre; TSUCHIYA, Tomoki; RINOLFI, Philippe; DROeGE, Thomas; MAECHLING, Simon; SCHMIDT, Jan Peter; TELSER, Joachim; DOeLLER, Uwe; MOSRIN, Marc; REY, Jullien; TIEBES, Joerg; WACHENDORFF-NEUMANN, Ulrike; (467 pag.)WO2016/102435; (2016); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belong isothiazole compound,3,4-Dichloroisothiazole-5-carboxylic acid,18480-53-0,Molecular formula: C4HCl2NO2S,mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

To 4.0 g (20.3 mmol) of 3,4-dichloroisothiazole-5-carboxylic acid were added 8 ml of oxalyl chloride and a catalytic amount of DMF, followed by stirring at 50¡ãC for 30 minutes to give rise to a reaction. The reaction mixture was concentrated under vacuum to obtain 3,4-dichloroisothiazole-5-carbonyl chloride. 1.9 g (50.5 mmol) of sodium borohydride was suspended in 40 ml of water. To the resulting suspension was dropwise added, at 10 to 15¡ãC, a solution of the 3,4-dichloroisothiazole-5-carbonyl chloride dissolved in THF (4 ml). Stirring was conducted at 15¡ãC for 30 minutes. Then, an aqueous citric acid solution was added to make the mixture weakly acidic and extraction with ethyl acetate was conducted. The organic layer was washed with water, dried over anhydrous magnesium sulfate, and concentrated. The resulting crystals were washed with hexane to obtain 3.0 g (yield: 81percent) of (3,4-dichloroisothiazol-5-yl)methanol as colorless crystals (melting point: 94 to 95¡ãC). 1H-NMR (CDCl3) delta: 2.28 (1H, bs), 4.96 (2H, s) ppm In 6 ml of acetonitrile were dissolved 0.62 g (3.10 mmol) of 3-chloro-1,2-benzoisothiazole 1,1-dioxide and 0.57 g (3.10 mmol) of the (3,4-dichloroisothiazol-5-yl)methanol. To the resulting solution was dropwise added 0.34 g (3.4 mmol) of triethylamine, followed by stirring at room temperature for 5 hours to give rise to a reaction. After the completion of the reaction, 12 ml of water was added. The resulting crystals were obtained by filtration. The crystals were washed with water and isopropyl alcohol to obtain 0.89 g (yield: 82percent) of 3-(3,4-dichloroisothiazol-5-ylmethoxy)-1,2-benzoisothiazole 1,1-dioxide as a colorless powder (melting point: 165 to 167¡ãC). 1H-NMR (CDCl3) delta: 5.79 (2H, s), 7.73-7.94 (4H, m) ppm.

With the synthetic route has been constantly updated, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid,belong isothiazole compound

Reference£º
Patent; KUMIAI CHEMICAL INDUSTRY CO., LTD.; IHARA CHEMICAL INDUSTRY CO., LTD.; EP2017268; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belong isothiazole compound,3,4-Dichloroisothiazole-5-carboxylic acid,18480-53-0,Molecular formula: C4HCl2NO2S,mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

In a 250 ml round bottom flask in water are sequentially added methanol 80 ml, 3,4-dichloro-thiazole-5-carboxylic acid (10.7 g, 53.8 mmol), gradually under the condition ice bath adds by drops two chlorine Asia sulphone (9.6 g, 80.7 mmol), the drop finishes heated to 40 degree c stirring 5 hours, after the reaction is complete to concentrate, add ethyl acetate to dissolve the filter, the filtrate of the distilled water are used to, saturated NaHCO3saturated NaCl wash again, anhydrous magnesium sulphate dried, concentrated, vacuum drying the white solid obtained 11.2 g, yield 98percent

With the synthetic route has been constantly updated, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid,belong isothiazole compound

Reference£º
Patent; Nankai University; Fan, Zi Jin; Zong, guangning; Li, Feng Yun; Li, yuedong; Li, Juan Juan; Ji, xiaotian; Chen, Lai; Zhu, Yu Jie; Liu, chaolun; Cheng, shengming; (21 pag.)CN103497182; (2016); B;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, 3,4-Dichloroisothiazole-5-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Add 5 mmol of compound I-1 to a 250 ml two-neck round bottom flask. 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDCI) is 6 mmol, 1-hydroxybenzotriazole (HOBT) was 5.13 mmol, dissolved in dichloromethane solution and stirred in an ice bath for 15 minutes. A solution of the amine in dichloromethane (25 ml) was added to the reaction system. Then 6 mmol of Et3N was added and the reaction mixture was stirred at room temperature for 16 hours. After the reaction is completed, wash with water (2 ¡Á 60 ml) and saturated with brine (80 ml)Wash the organic layer, The organic layer was dried over MgSO4 and concentrated under reduced vacuo. The residue is purified by 100-200 mesh silica gel column chromatography to give compound II-1. The eluent is petroleum ether: ethyl acetate at 60-90 degrees Celsius.Its volume ratio is 4:1, yield 70%; white solid, melting point 125-126%,

18480-53-0, The synthetic route of 18480-53-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Nankai University; Fan Zhijin; Yang Dongyan; Li Zhengming; Wang Haixia; Guo Xiaofeng; Zhang Nailou; Wu Qifan; Yu Bin; Zhou Shuang; (21 pag.)CN110041287; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, 3,4-Dichloroisothiazole-5-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

SYNTHESIS EXAMPLE 1 Process (a): After thionyl chloride (10 ml) had been added to 3,4-dichloro-5-isothiazole-carboxylic acid (0.99 g), the mixture was refluxed by heating for 2 hours. The excess of thionylchloride was then distilled off under reduced pressure, and 3,4-dichloro-5-isothiazolecarboxylic acid chloride was obtained., 18480-53-0

18480-53-0 3,4-Dichloroisothiazole-5-carboxylic acid 49837, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Assmann, Lutz; Kitagawa, Yoshinori; Ishikawa, Koichi; Yamazaki, Daiei; Sawada, Haruko; Araki, Yasuo; Sakuma, Haruhiko; Kinbara, Taro; Imanishi, Kinya; US2003/13750; (2003); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,18480-53-0

(3,4-dichloroisothiazol-5-yl)methanolA solution of 3,4-dichloroisothiazole-5-carboxylic acid (2.0 g), N1N- dimethylformamide (few drops) and thionyl chloride (20 mL) in toluene (60 mL) was heated at 1000C for 16 hours. The reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was dissolved in tetrahydrofuran (20 mL), cooled to -200C under a nitrogen atmosphere and treated dropwise with a 1.0 M sodium borohydride solution in N, N- dimethylformamide (8.5 ml.) over 1 hour. The mixture was stirred for 5 minutes after the end of addition and quenched with 1.0 M aqueous hydrochloric acid solution. The mixture was concentrated to low bulk under reduced pressure and extracted with ethyl acetate. The combined organic layer was washed with brine, dried over magnesium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography on silica gel, eluting with a mixture of cyclohexane and dichloromethane (1 :0 to 0:1 by volume), to afford the title compound as a pale yellow solid (1.1 g).1H NMR (300 MHz, CDCI3): delta 2.60 (s, 1H); 4.96 (s, 2H).

With the rapid development of chemical substances, we look forward to future research findings about 3,4-Dichloroisothiazole-5-carboxylic acid

Reference£º
Patent; PULMAGEN THERAPEUTICS (ASTHMA) LIMITED; HYND, George; MONTANA, John Gary; FINCH, Harry; ARIENZO, Rosa; AHMED, Shahadat; WO2010/142934; (2010); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com