Month: April 2022

Computed Properties of C5H7N3S. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 2-Amino-6-methylpyrimidine-4-thiol, is researched, Molecular C5H7N3S, CAS is 6307-44-4, about Guanine phosphoribosyltransferase from Escherichia coli. Specificity and properties. Author is Miller, Richard L.; Ramsey, Gwendolyn A.; Krenitsky, Thomas A.; Elion, Gertrude B..

The specificity and properties of a novel guanine phosphoribosyltransferase of E. coli were studied and compared to those of the hypoxanthine-guanine phosphoribosyltransferase from other sources. The structural requirements for binding of purines to this enzyme were explored by the determination of the Ki values for 100 purines and purine analogs. The most effective binding occurred when the purine contained an oxo or SH group in the 6 position and an NH2 or OH group in the 2 position. Unlike the hypoxanthine-guanine phosphoribosyltransferase from other sources, this enzyme bound hypoxanthine 67 times less effectively than guanine and 4 times less effectively than xanthine. Rates of nucleotide formation from a number of purines and purine analogs were also determined The enzyme had a pH optimum from 7.4 to 8.2. From secondary double-reciprocal plots derived from an initial velocity anal., the Km values were 0.037mM for guanine and 0.33mM for 5-phosphoribosyl 1-pyrophosphate. The enzyme was sensitive to inhibition by p-chloromercuribenzoate, and this inhibition could be reversed by either dithiothreitol or β-mercaptoethanol. The apparent activation energy with guanine as substrate was 12,800 cal/mole below 23° and 3370 cal/mole above 23°. Using isoelec. focusing, the guanine phosphoribosyltransferase had an apparent pI of 5.50, while the pI of a 2nd enzyme which was specific for hypoxanthine was 4.8.

Here is just a brief introduction to this compound(6307-44-4)Computed Properties of C5H7N3S, more information about the compound(2-Amino-6-methylpyrimidine-4-thiol) is in the article, you can click the link below.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Name: Aluminum(III) sulfate xhydrate. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: Aluminum(III) sulfate xhydrate, is researched, Molecular Al2H8O13S3, CAS is 17927-65-0, about Application of polyacrylamide flocculation with and without alum coagulation for mitigating ultrafiltration membrane fouling: Role of floc structure and bacterial activity. Author is Liu, Ting; Lian, Yuanlong; Graham, Nigel; Yu, Wenzheng; Rooney, David; Sun, Kening.

There is a growing interest in the use of ultrafiltration (UF) for the treatment of micro-polluted surface waters for drinking water supplies. Effective pretreatment is required to mitigate membrane fouling and in this paper we have evaluated the application of polyacrylamide (PAM) flocculation with alum coagulation. Bench scale tests were conducted over extended periods with two types of PAM (different mol. weights (MW)) applied with, and without alum coagulation, to investigate their impact on membrane fouling. The structure of the resulting flocs formed in the process and the activity of bacteria within the membrane tank were identified as two key factors influencing UF system performance. It was found that development of the cake layer and hydraulic resistance of the membrane were influenced by the floc properties, which were in turn related to the MW and dose of the PAM. Coagulation and flocculation using the larger MW PAM formed amorphous flocs with a lower fractal dimension, which contributed to a lower d. of the cake layer and lower rate of increase in trans-membrane pressure. PAM flocculation without alum coagulation induced severe membrane fouling by forming a continuous gel-like layer on the membrane surface. By alum-PAM dosing it was found that the concentration of bacteria present in the membrane tank and adhering to the cake layer, was sufficient to remove nearly all of the ammonia and around 80% phosphorus in the raw water. These results demonstrate that the combination of a high MW PAM with alum as a pretreatment method of UF process can effectively improve the floc properties and cake layer structure for controlling membrane fouling and producing high quality treated water.

Here is just a brief introduction to this compound(17927-65-0)Name: Aluminum(III) sulfate xhydrate, more information about the compound(Aluminum(III) sulfate xhydrate) is in the article, you can click the link below.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: 2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide( cas:119639-24-6 ) is researched.SDS of cas: 119639-24-6.Waldner, Adrian published the article 《[4+2] Cycloaddition of α,β-unsaturated hydrazones. 3. Isothiazolo[4,5-b]pyridin-3(2H)-one 1,1-dioxides (4-azasaccharin derivatives)》 about this compound( cas:119639-24-6 ) in Helvetica Chimica Acta. Keywords: unsaturated hydrazone cycloaddition isothiazolone dioxide; azabutadiene cycloaddition isothiazolone; solvent effect cycloaddition isothiazolone dioxide azabutadiene; isothiazolopyridinone dioxide; azasaccharin derivative. Let’s learn more about this compound (cas:119639-24-6).

The [4 + 2] cycloaddition of α,β-unsaturated hydrazones, Me2NN:CHCR:CHR1 (R = Me, Et, CHMe2, R1 = H; R = R1 = Me), (1-azabuta-1,3-dienes) with isothiazol-3(2H)-one 1,1-dioxide derivatives I (R2 = H, CMe3, Me3CCH2CMe2, 4-ClC6H4, PhCH2, 4-MeOC6H4CH2) affords, depending on the solvent used, picolinamides II or III, and 4-azasaccharin derivatives IV or V. The course of the reaction is mainly influenced by the substituent R2 of the dienophile I.

Here is just a brief introduction to this compound(119639-24-6)SDS of cas: 119639-24-6, more information about the compound(2-(tert-Butyl)isothiazol-3(2H)-one 1,1-dioxide) is in the article, you can click the link below.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Raman microscopy study of basic aluminum sulfate. Part II. Raman microscopy at 77 K, published in 1999-09-15, which mentions a compound: 17927-65-0, mainly applied to Raman microscopy basic aluminum sulfate, Name: Aluminum(III) sulfate xhydrate.

The tridecameric Al polymer [AlO4Al12(OH)24(H2O)12]7+ was prepared by forced hydrolysis of Al3+ up to an OH/Al molar ratio of 2.2. Upon addition of sulfate the tridecamer crystallized as the monoclinic basic Al sulfate Na0.1[AlO4Al12(OH)24(H2O)12](SO4)3.55. These crystals were studied using Raman microscopy at 300 and 77 K and compared to Na2SO4.xH2O and Al2(SO4)3.xH2O. The Raman spectrum of basic Al sulfate is dominated by 2 broad bands, which are assigned to the ν2 and ν4 SO42- triplets at 446, 459 and 496 and 572, 614 and 630 cm-1. The ν1 is observed as a single band at 990 cm-1, partly overlapped by the ν3 triplet at 979, 1009 and 1053 cm-1 of the sulfate group in the Al13 sulfate structure. Also the band at 726 cm-1 is assigned to an Al-O mode of the polymerized Al-O-Al bonds in the Al13 Keggin structure. The OH-stretching region of the basic Al sulfate was reported. The 77 K spectrum shows 3 crystal H2O bands at 3035, 3138 and 3256 cm-1 accompanied by 3 Al-H2O bands at 3354, 3418 and 3498 cm-1 and 4 Al-OH bands at 3533, 3584, 3671 and 3697 cm-1.

Compound(17927-65-0)Name: Aluminum(III) sulfate xhydrate received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(Aluminum(III) sulfate xhydrate), if you are interested, you can check out my other related articles.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Camphane derivatives. VII. Syntheses and structure of 3-methyl-3aβ,7aβ-bornano[3,2-d]oxazolidin-2-one and its derivatives, published in 1965, which mentions a compound: 560-09-8, mainly applied to , Application In Synthesis of (1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid.

cf. CA 62, 4055b. In connection with the elucidation of the structure of I and II, obtained by the reaction of 3α-methylaminocamphor (III) with COCl2, 3-methyl-3aβ,7aβ-(IV) and 3aα,7α-bornano[3,2-d]oxazolidin-2-one (V) and their derivatives were synthesized and studied stereochem. Their N.M.R. spectra were also investigated (tabulated and discussed). Excess COCl2 in C6H6 added dropwise with stirring to a boiling suspension of 10 g. III.HCl in dry C6H6 until dissolution gave 7 g. VI, m. 82° (Et2O-hexane), [α]25D 142° (CHCl3), showing a pos. Cotton effect on optical rotatory dispersion (ORD), 0.36 g. II, m. 193° (MeOH-Et2O), [α]25D 127.7° (CHCl3), showing a pos. Cotton effect on ORD, and 0.3 g. unchanged III.HCl. The resinous oil obtained on concentration redissolved in C6H6, the solution washed with 10% aqueous Na2CO3, dried, and concentrated, the oily residue kept several days (HCl evolved), the resulting solid extracted with Et2O, and the Et2O-soluble fraction washed with dilute aqueous Na2CO3, chromatographed on neutral Al2O3, and eluted with Et2O gave 5 g. I, m. 82° (Et2O-hexane), [α]25D -22° (CHCl3), showing a neg. plain curve on ORD; the product eluted with MeOH and the Et2O-insoluble solid combined and recrystallized from MeOH gave 0.40 g. II. VI (0.2 g.) refluxed 2 hrs. with 5 ml. 25% MeOH-HCl gave 0.092 g. I and 0.046 g. VII, m. 122°. VI(0.5 g.) refluxed 5 hrs. with 3 ml. SOCl2 gave 0.35 g. I, m. 82°. (VII,R=Me); (IX,R=Et); (X,R=Ac); (XI,R=Bz); A suspension of I in 4 ml. 2% HCl heated 30 min. at 80° on a steam bath until CO2 evolution ceased and the resulting solution concentrated to dryness gave 15 mg. III.HCl, m. 238° (decomposition). ClCO2Me (1 mole) added dropwise to 2 moles III in Et2O with stirring and ice cooling and the mixture stirred 1 hr. at room temperature, gave VIII, b1, 130-40°, m. 53-4°. A mixture of 100 mg. I and 200 mg. KOH in 10 ml. MeOH refluxed 10 hrs. gave VIII, b1 135°, m. 50°. I (480 mg.) in 5 ml. MeOH containing 500 mg. Na heated 30 min. at 70° gave 400 mg. VIII, b1, 130-40°. I (1 g.) in 15 ml. 30% MeOH-HCl refluxed 10 hrs. gave 0.6 g. VII, m. 122°. I (1 mole) in C5H5N heated 2 hrs. at 70° with 1.2 moles AgNO3 in MeOH also gave VII, m. 122°. I (1 g.) refluxed with 25% EtOH-HCl and worked up like VII gave 0.9 g. IX, b0.07 145°. Both VII and IX were easily hydrolyzed to III by concentrated HCl. A mixture of 2.44 g. I and 2 g. AgOAc in AcOH refluxed 8 hrs. gave 2.1 g. X, m. 107° (hexane), showing a plain neg. curve on ORD. I (240 g.) mixed with 230 mg. AgOBz and 2 g. BzOH, and the mixture heated 10 hrs. at 150-60° and cooled, and the product isolated by extraction with C6H6 gave 200 mg. XI, m. 153-4°, [α]23D -47.2° (CHCl3). Acid hydrolysis of both X and XI led to III, no other products or intermediates being obtained. I (100 mg.) in 10 ml. MeOH containing 200 mg. KOH hydrogenated over 100 mg. 10% Pd-C at room temperature and atm. pressure with stirring (9 ml. H absorbed during 1 hr.) gave 60 mg. IV, m. 119° (Et2O), [α]28D 108.2° (CHCl3), showing a pos. plain curve on ORD. IV was also obtained in fairly good yield by hydrogenation with Raney Ni in alk. medium. 3α-Aminoborneol (XII) (300 mg.) and 3 ml. 98% HCO2H heated 6 hrs. at 110° gave 150 mg. XIII, m. 143° (EtOH). XII (100 mg.) and 100 mg. HCONH2 heated 10 min. at 120° gave 100 mg. XIII, m. 143°. (XII,R=H); (XIII,R=CHO); (XIV,R=Me); (XVIII,R=Cl); (XIX,R=OH); (XXII,R=OAc); (XXIII,R=OMe); XIII (300 mg.) in tetrahydrofuran (THF) added dropwise to 200 mg. LiAlF4 in THF with ice water cooling and the mixture refluxed and stirred 4 hrs. gave 200 mg. XIV, m. 85-6° (hexane). III (3 g.) in Et2O added to 300 mg. LiAlH4 in Et2O and the mixture stirred 2 hrs. at room temperature gave 1.0 g. XIV, m. 85° (hexane). To a mixture of 500 mg. XIV, 10 ml. C6H6, and 10 ml. 10% aqueous Na2CO3 was added 20% C6H6COCl2 with stirring until the organic layer became clear (the mixture was kept alk. throughout the reaction) gave 510 mg. IV, m. 119° (Et2O), [α]26D 108° (CHCl3), IV (10 mg.) refluxed 6 hrs. with 2 ml. MeOH containing 200 mg. KOH gave 6 mg. XIV, m. 80-2°. XIV (200 mg.) and 2 ml. CS2 in 15 ml. EtOH refluxed until no more H2S was evolved (15 hrs.) (during the reaction addnl. CS2 was added) gave 120 mg. XV, m. 206° (MeOH). A suspension of 120 mg. XV and 500 mg. Raney Ni (WII) in EtOH stirred 3 hrs. at room temperature and kept overnight gave 50 mg. XIV, m. 80-2°. To 100 mg. XV in 1 ml. AcOH was added dropwise 35% H2O2 until no more turbidity occurred and the mixture let stand 2 hrs. at room temperature to give IV, m. 119°. 3α-Aminoisoborneol (200 mg.) and 1 ml. 98% HCO2H refluxed 5 hrs. gave 150 mg. 3α-formamido analog, m. 162° (Me2CO-Et2O), which (480 mg.) reduced with LiAlH4 in Et2O gave 300 mg. 3α-methylaminoisoborneol (XVI), m. 66-7° (Et2O-hexane) (HCl salt m. >310°). II (70 mg.) treated with 2 ml. C5H5N and 1 ml. Ac2O under ice water cooling and the solution kept ∼1 week at room temperature gave 60 mg. XVII, m. 120.5° (Et2O), [α]30D 150.3°, showing a pos. plain curve on ORD. XVII on hydrolysis with NaOH or HCl gave II. II(100 mg.) and 2 ml. SOCl2 refluxed 20 hrs. until gas evolution ceased gave 100 mg. XVIII, m. 132° (Et2O-hexane), [α]28D -21.5° (CHCl3), showing a pos. plain curve on ORD. II (100 mg.) and 500 mg. PCl5 in 2 ml. POCl3 refluxed 20 hrs. gave 80 mg. XVIII, m. 130-1°. XVIII (400 mg.) suspended in 10 ml. 10% HCl heated 15 hrs. at 100° gave quant. XIX, m. 254° (decomposition) (MeOH-Et2O), [α]24D 13.3° (CHCl3), showing a pos. plain curve on ORD. XVIII (260 mg.) in 10 ml. MeOH containing 620 mg. KOH heated 4 hrs. at 75° and kept overnight at room temperature gave 100 mg. camphor-quinone (XX), m. 190-5°, and 100 mg. XIX. XIX (130 mg.) in 3 ml. absolute MeOH containing 200 mg. Na kept 1 week at room temperature gave 40 mg. D-camphoric acid (XXI), m. 187° (Et2O-hexane), [α]25D 46.1° (EtOH), and a small amount XX. XXI (10 mg.) heated 4 hrs. at 140° with 10 mg. ZnCl2 and 500 mg. Ac2O gave 3 mg. camphoric anhydride, m. 220°. XIX (50 mg.) in 10 ml. MeOH containing 50 mg. KOH hydrogenated over 100 mg. Raney Ni at room temperature and atm. pressure with stirring (6 ml. H absorbed, during 1 hr.) gave 37 mg. II, m. 188-90°. Zn (600 mg.) added to 130 mg. XIX in 6 ml. AcOH at 100° with stirring, after 2 hrs. 600 mg. Zn added, and the mixture heated and stirred 2 hrs. gave 20 mg. unchanged XIX, and 45 mg. II, m. 190-2°. XVIII (40 mg.), 60 mg. AgOAc; and 1 ml. C5H5N in 1 ml. AcOH heated 3 hrs. at 100° gave 25 mg. XXII, m. 84-5° (Et2O-hexane), [α]22D 67.2° (CHCl3), showing a pos. plain curve on ORD. To 50 mg. XIX in 5 ml. C5H5N was added 1 ml. Ac2O with cooling and the solution kept 1 week at room temperature to give 50 mg. XXII, m. 84° (Et2O-hexane). Treatment of either XVIII or XIX with excess AgOAc in C5H5N gave XXII. XXII (20 mg.) heated 4 hrs. on a steam bath with 2 ml. 10% HCl gave XIX, m. 254° (decomposition) (Et2O). XIX (50 mg.) and 2 ml. SOCl2 refluxed 20 hrs. gave XVIII, m. 132° (Et2O-hexane). A mixture of 40 mg. XVIII, 60 mg. AgNO3; 2 ml. C5H5N, and 2 ml. MeOH heated 1.5 hrs. on a steam bath until no further precipitation of solid occurred gave XXIII, b0.05 110-20°, m. 76-8° (hexane), showing a small pos. plain curve on ORD. XVIII (20 mg.) in 2 ml. 25% MeOH-HCl heated 5 hrs. gave 12 mg. XXIII, b0.05 115°. XXIII (50 mg.) in MeOH hydrogenated over 100 mg. Raney Ni at room temperature and atm. pressure (1 mol. equivalent H was absorbed) gave XXIV, b0.15 120-30°, m. 48-50°. To 260 mg. XIX in AcOD (prepared from 10 ml. Ac2O and 3 ml. D2O) was added 1 g. Zn at 110° with stirring, after 1.5 hrs. 1.5 g. Zn added, and the mixture heated 4.5 hrs. to give XXV, m. 192-3°. XVIII (100 mg.) in 10 ml. MeOH containing 200 mg. KOH hydrogenated over 100 mg. 10% Pd-C at room temperature and atm. pressure (2 mol. equivalents H absorbed in 15 min.) gave 60 mg. IV, m. 119° (Et2O-hexane), and 13 mg. XIV, m. 84-5°. XVIII (55 mg.) in 10 ml. MeOH containing 100 mg. KOH hydrogenated over 200 mg. Raney Ni at room temperature and atm. pressure (2 mot. equivalents H absorbed in 15 min.) gave 28 mg. V, m. 123° (Et2O), [α]27D -33.3° (CHCl3), showing a neg. plain curve on ORD. The N.M.R. spectral evidence confirmed the assignment of the configurations of most of the compounds prepared Pertinent ir data were given and the N.M.R. spectra of IV and V recorded.

Compound(560-09-8)Application In Synthesis of (1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid received a lot of attention, and I have introduced some compounds in other articles, similar to this compound((1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Integrated Molecular Chirality, Absolute Helicity, and Intrinsic Chiral Topology in Three-Dimensional Open-Framework Materials, published in 2008-12-24, which mentions a compound: 560-09-8, mainly applied to cobalt camphorate homochiral polymeric complex preparation structure; nickel camphorate homochiral polymeric complex preparation structure; benzenedicarboxylate cobalt camphorate trimethylenedipyridine polymeric complex preparation structure; indium camphorate homochiral polymeric complex preparation structure; magnesium malate polymeric complex preparation structure; crystal structure metal camphorate malate polymeric complex; chirality metal camphorate malate polymeric complex, Category: isothiazole.

While chiral materials are common, few are known that integrate mol. chirality, absolute helicity, and 3-dimensional intrinsically chiral topol. nets in one material. Such multihomochiral features may lead to enhanced chiral recognition processes that are important for enantioselective catalysis or separation Reported here are 3-dimensional open-framework materials with unusual integration of various homochiral and homohelical features, even in the bulk sample. Thus, Me4N[InL2]·2H2O (H2L = D- and L-camphoric acid (Hcam)), (Me3NCH2CH2OH)[In(D-cam)2]·2H2O, Co(D-cam)1/2(bdc)1/2(tmdpy) (H2dbc = 1,4-benzenedicarboxylic acid; tmdpy = 4,4′-trimethylenedipyridine). Ni(D-cam)(H2O)2 and Mg(L-ma)(H2O)2·H2O (L-maH2 = L-malic acid) were prepared and their crystal structures determined

Compound(560-09-8)Category: isothiazole received a lot of attention, and I have introduced some compounds in other articles, similar to this compound((1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

The preparation of ester heterocycles mostly uses heteroatoms as nucleophilic sites, which are achieved by intramolecular substitution or addition reactions. Compound: (1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid( cas:560-09-8 ) is researched.Recommanded Product: 560-09-8.Su, Zhi; Lv, Gao-Chao; Fan, Jian; Liu, Guang-Xiang; Sun, Wei-Yin published the article 《Homochiral ferroelectric three-dimensional cadmium(II) frameworks from racemic camphoric acid and 3,5-di(imidazol-1-yl)benzoic acid》 about this compound( cas:560-09-8 ) in Inorganic Chemistry Communications. Keywords: crystal structure cadmium imidazolylbenzoate D L camphorate; cadmium imidazolylbenzoate camphorate enantioselective preparation ferroelectricity CD luminescence. Let’s learn more about this compound (cas:560-09-8).

Two three-dimensional (3D) chiral frameworks, [Cd6(L)4(D-Cam)4(H2O)4]·2H2O (1D) and [Cd6(L)4(L-Cam)4(H2O)4]·2H2O (1L) [HL = 3,5-di(imidazol-1-yl)benzoic acid, D-H2Cam = D-camphoric acid, L-H2Cam = L-camphoric acid], were synthesized under hydrothermal conditions, which represent a nice example of enantioselectivity of organic racemic ligands (DL-camphorates) during the self-assembly process and formation of the metal complexes. Compounds 1D and 1L feature 3-dimensional framework with chiral chains constructed by Cd(II) cations and camphorate anions. Solid-state CD spectra of 1D and 1L revealed that they are enantiomers. Also, the complexes with chiral C2 space group display ferroelec. behavior with a remnant elec. polarization (Pr) of ∼0.140 μC/cm2 and an elec. coercive field (Ec) of ∼17.11 kV/cm.

Compound(560-09-8)Recommanded Product: 560-09-8 received a lot of attention, and I have introduced some compounds in other articles, similar to this compound((1S,3R)-1,2,2-Trimethylcyclopentane-1,3-dicarboxylic acid), if you are interested, you can check out my other related articles.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Safety of 2-Amino-6-methylpyrimidine-4-thiol. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 2-Amino-6-methylpyrimidine-4-thiol, is researched, Molecular C5H7N3S, CAS is 6307-44-4, about Inhibition studies of Pyrimidine class of compounds on Enoyl-ACP reductase enzyme. Author is Ganatra, Sunil H.; Bodhe, Manoj N.; Tatode, P. N..

Present work is aimed to identify and understand the inhibiting nature of Pyrimidine class of compounds to enoyl acyl carrier protein reductase (Enoyl-ACP reductase), which is one of the main receptor proteins used in drug discovery for screening anti-leprosy agents. Series of Pyrimidine based compounds are virtually designed using the mol. mechanic technique. The designed mols. were docked using with crystal structure of Enoyl-ACP reductase (PDB ID: 2NTV) using Autodock mol. docking software. The method uses rigid-protein and flexible ligand-techniques to acquire maximum conformations of ligand mols. The docking results were evaluated using the acquired binding energy values for each ligand-protein complex. Those mols. having higher neg. binding energy values with higher hydrogen bonds are selected for further anal. The selected mols. show better hydrophobic, electrostatic and steric interactions with receptor protein. It is reported that the presence of -CH2OH at R1 and -C6H5 at R2 and R3 positions enhance the neg. binding energy (ΔG kcal mol-1) values. Particularly -OC6H5 at R1 and -OH at R2 help in increasing the interactions between ligand and protein. The results show the mol. level interactions and inhibit the receptor protein.

Compound(6307-44-4)Safety of 2-Amino-6-methylpyrimidine-4-thiol received a lot of attention, and I have introduced some compounds in other articles, similar to this compound(2-Amino-6-methylpyrimidine-4-thiol), if you are interested, you can check out my other related articles.

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 6307-44-4, is researched, Molecular C5H7N3S, about N-(3-Sulfanylmethyl-4H-1,2,4-triazol-4-yl)-2-sulfanylacetamide Containing Terminal 2-Amino-6-methylpyrimidin-4-yl Fragments. Synthesis from 2-[(2-Amino-6-methylpyrimidin-4-yl)sulfanyl]acetohydrazide and Triethyl Orthoformate, the main research direction is amino methylpyrimidinyl sulfanylacetohydrazide preparation triethyl orthoformate heterocyclization; methyl aminopyrimidinyl sulfanylmethyltriazoloacetamide preparation.Recommanded Product: 6307-44-4.

2-[(2-Amino-6-methylpyrimidin-4-yl)sulfanyl]acetohydrazide reacted with tri-Et orthoformate at a molar ratio of 1:1 to give 2-[(2-amino-6-methylpyrimidin-4-yl)sulfanyl]-N-{3-[(2-amino-6-methylpyrimidin-4-yl)sulfanylmethyl]-4H-1,2,4-triazol-4-yl}acetamide.

From this literature《N-(3-Sulfanylmethyl-4H-1,2,4-triazol-4-yl)-2-sulfanylacetamide Containing Terminal 2-Amino-6-methylpyrimidin-4-yl Fragments. Synthesis from 2-[(2-Amino-6-methylpyrimidin-4-yl)sulfanyl]acetohydrazide and Triethyl Orthoformate》,we know some information about this compound(6307-44-4)Recommanded Product: 6307-44-4, but this is not all information, there are many literatures related to this compound(6307-44-4).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called The testing conditions of sodium carbonate, sodium sulfate and certain other hydrated salts, published in 1931, which mentions a compound: 17927-65-0, Name is Aluminum(III) sulfate xhydrate, Molecular Al2H8O13S3, Quality Control of Aluminum(III) sulfate xhydrate.

The H2O content of Na2CO3.10H2O can be determined by heating at 98° to constant weight The most stable hydrate is Na2CO3.2H2O; it is formed on standing from anhydrous soda or from the other hydrates. Na2SO4.10H2O loses all the H2O by drying a few hrs. at 98°, although the natural decahydrate, mirabilite, is stable. Borax requires heating to redness to accomplish complete dehydration. CuSO4.5H2O is very stable and does not lose water on standing over H2SO4. Al2(SO4)3.18H2O is also very stable and does not easily lose H2O. The chrome alums are easily deprived of H2O.

From this literature《The testing conditions of sodium carbonate, sodium sulfate and certain other hydrated salts》,we know some information about this compound(17927-65-0)Quality Control of Aluminum(III) sulfate xhydrate, but this is not all information, there are many literatures related to this compound(17927-65-0).

Reference:
Isothiazole – Wikipedia,
Isothiazole – ScienceDirect.com