Day: June 9, 2021

288-16-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Isothiazole, cas is 288-16-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Compound 1 (20 g, 0.235 mol) was added under stirring with nitrogen to dry 100 ml of ether and stirred to dissolve,And then cooled to below 0 ,To this was added n-butyllithium (0.24 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, the incubation reaction was carried out until no compound 1 was added.To the reaction solution was added bromine (0.5 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, slowly raise to room temperature,After stirring for half an hour, the reaction was quenched by the addition of hydrochloric acid solution (2N, 500 ml).The aqueous phase was extracted with ether (200 ml * 3) and discarded.The combined organic phase, sodium dithionite solution (100 ml * 2)Dried over anhydrous sodium sulfate, filtered and concentrated to dryness,A yellow oily compound was prepared.

The chemical industry reduces the impact on the environment during synthesis,288-16-4,Isothiazole,I believe this compound will play a more active role in future production and life.

Reference：
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890176; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 4-Bromoisothiazole, cas is 24340-77-0 its synthesis route is as follows.

4-bromoisothiazole (commercially available from Aurora, 500 mg, 3.05 mmol) was dissolved in degassed 1 ,2-Dimethoxyethane (DME) (5 ml). Pd(Ph3)4 (176 mg, 0.152 mmol) was added thereto. The reaction mixture was stirred at room temperature for 15min. [2,4-bis(methyloxy)-5-pyrimidinyl]boronic acid (commercially available from Aldrich ,1178 mg, 6.40 mmol) and 5ml_ of degassed 1 M/H2O solution of NaHCO3 were added to the reaction mixture under N2 atm. After 2h30min stirring at 900C the mixture was diluted with water and extracted with DCM. The collected organic phases were evaporated. The residue was purified by flash chromatography eluting with cyclohexane/EtOAc 5:1. 686 mg of the title compound were isolated as a yellow solid. MS (ES) {mlz): 224.06 [M+H]+.

24340-77-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24340-77-0 ,4-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference：
Patent; Glaxo Group Limited; WO2009/43883; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, and cas is 936-16-3, its synthesis route is as follows.

Step 2. A mixture of 23 (180 mg, 0.70 mmol), 1 (60 mg, 0.35 mmol), CsF (107 mg, 0.70 mmol), Cs2CO3 (458 mg, 1.41 mmol) in DMF (3 mL) was degassed and purged with N2 (3X). The mixture was stirred at 80°C for 1 h, filtered, and then purified by prep-HPLC to give Compound 143 (15 mg, 5percent) as a light yellow solid. 1H NMR (DMSO-d6, 400MHz) delta 7.97 (d, 1H), 7.81 (s, 1H), 7.72 (d, 1H), 7.43 (s, 1H), 7.31 (s, 2H), 7.18 (s, 2H), 5.09 (s, 2H), 2.33 (s, 3H); LCMS (ESI): m/z 356.0 (M+H).

936-16-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,936-16-3 ,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference：
Patent; NUMERATE, INC.; RAIMUNDO, Brian; KOLTUN, Elena S.; GRIFFIN, John; STANGELAND, Eric; (93 pag.)WO2018/49324; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1 its synthesis route is as follows.

EXAMPLE 75; 5-[2-(4-BENZO[D]ISOTHIAZOL-3-YL-PIPERAZIN-1-YL)-ACETYL]- 1, 1, 3, 3-TETRAMETHYL-INDAN-2-ONE A mixture of 5- (2-Chloro-acetyl)-1, 1,3, 3-tetramethyl-indan-2-one (7.85 g, 29.6 mmol), 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (7.95 g, 31.1 mmol), potassium carbonate (13.5 g, 97.7 mmol), sodium iodide (4.50 g, 30.0 mmol) in acetonitrile (550 mL) was stirred at rt for 24 h. The reaction was quenched with water (120 mL), and acetonitrile was evaporated. The residue was extracted with methylene chloride (2 x 250 mL). The combined organic extracts were washed with water, brine, dried over Na2SO4, evaporated, and purified by chromatography (silica gel, 7: 3 to 6: 4 hexanes/ethyl acetate) to give 5-[2-(4-Benzo [agisothiazol-3-yl- piperazin-1-yl)-acetyl]-1, 1,3, 3-tetramethyl-indan-2-one (11.2 g, 85%) as an off-white solid :’H NMR (300 MHz, CDC13) 8 8.02 (dd, J= 8.0, 1.6 Hz, 1 H), 7.96 (s, 1 H), 7.91 (d, J = 8.0 Hz, 1 H), 7.83 (d, J = 8.0 Hz, 1 H), 7.47 (t, J = 7.0 Hz, 1 H), 7.38-7. 34 (m, 2H), 3.94 (br s, 2H), 3.67-3. 65 (m, 4H), 2.90- 2.88 (m, 4H), 1.38 (s, 6H), 1.37 (s, 6H).

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference：
Patent; WARNER-LAMBERT COMPANY LLC?; WO2005/56540; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: [1-(tert-Butyl)-5-{4-(piperidin-1-yl)phenyl}-1H-pyrazol-3-yl]methanol (54.9 mg, 0.18 mmol) was reacted with tripheny phosphine(93.1 mg, 0.36 mmol) and carbontetrabromide (121 mg,0.37 mmol) for 1 h. at 0 C. Without purification, the reaction mixturewas added to compound 8 (27.3 mg, 0.16 mmol) in DMF, andstirred for overnight. Then the reaction mixture was extracted withethyl acetate. The organic layer was dried over magnesium sulfate,filtered, concentrated in reduced pressure, and purified by columnchromatography (Hex: EtOAc = 4: 1 then 1: 1) to give title compound(15.2 mg, 20percent). 1H NMR (300 MHz, CDCl3) d 7.89 (d, J = 7.9 Hz, 1H), 7.64?7.52(m, 2H), 7.40 (d, J = 7.1 Hz, 1H), 7.30?7.17 (m, 2H), 6.29 (d,J = 8.7 Hz, 2H), 6.22 (s, 1H), 4.52 (s, 2H), 4.46 (s, 2H), 3.26?3.23(m, 4H), 1.79?1.74 (m, 4H), 1.67?1.63 (m, 2H), 1.49 (s, 9H).; 13CNMR (75 MHz, CDCl3) d 151.9, 144.4, 143.3, 135.4, 134.3, 132.5, 131.1, 128.9, 124.5, 123.7, 121.4, 114.9, 109.0, 61.0, 50.0, 41.4,31.2, 25.7, 24.3.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, 936-16-3

Reference：
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 6 Synthesis of potassium 3,4-dichloroisothiazole-5-carboxylate (Compound No. 7) Potassium hydroxide (0.27 g) dissolved in 3 ml of water was added to a solution of 3,4-dichloroisothiazole-5-carboxylic acid (0.95 g) in 4 ml of ethanol. The solvent was distilled off under reduced pressure. The crystals thus obtained were washed with a small quantity of ethanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Dichloroisothiazole-5-carboxylic acid, 18480-53-0

Reference：
Patent; Mitsui Toatsu Chemicals, Incorporated; US5240951; (1993); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Piperazinobenzisothiazole hydrochloride, and cas is 87691-88-1, its synthesis route is as follows.

To a solution of N- [5-CHLORO-4- (2-CHLORO-ACETYL)-2-METHYL-PHENYL]- acetamide (1.375 g, 5.286 mmol), in acetonitrile (50 mL) was added 3- PIPERAZIN-1-YL-BENZO [d] isothiazole hydrochloride (1.352 g, 5.286 mmol), potassium iodide (1EQ), and potassium carbonate (1.5eq). The reaction was stirred as a suspension at rt overnight. The reaction was diluted with H20 and the filtered. After drying at 50 C under high vacuum overnight, N- {4- [2- (4-BENZO [d] isothiazol-3-yl-peperazin-1-yl)-acetyl]-5-chloro-2- METHYL-PHENYL)-ACETAMIDE was collected as a white solid (2.034 g, 4.598 mmol). Yield = 87%. 100% pure at 254 nM; LCMS (APCI) : 443.3 [M+H] + ; ‘H NMR (400 MHz, DMSO-d6) B 9.41 (s, 1H), 8.02 (d, J = 8. 80HZ, 2H), 7.81 (s, 1H), 7.59 (s, 1H), 7.52 (t, J = 7.34Hz, 1H), 7.39 (t, J = 7.34Hz, 1H), 3.80 (s, 2H), 3.44-3. 37 (m, 4H), 3.30 (s, H20), 2.77-2. 68 (m, 4H), 2.23 (s, 3H), 2.08 (s, 3H).

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference：
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/41793; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

94594-90-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

[00124] [3aS-[1(E),3a,6,7a]]-1-[3-(3,4-difluorophenyl)-1-oxo-2-propenyl]-hexahydro-8,8-dimethyl-3H-3a,6-methano-2,l-benzisothiazole-2,2-dioxide: At 0-5 0C, a solution of 3-(3,4-difluoro-phenyl)-acryloyl chloride in dichloromethane (30 mL) was added to a mixture of (2R)-bornane-10,2-sultam (14.5 g, 67.35 mmol, 1.00 equiv), triethylamine (20.4 g, 201.98 mmol, 3.00 equiv), and dichloromethane (120 mL). The resulting solution was stirred at ambient temperature for about 3 hours and then water (40 mL) was added. Standard extractive workup with dichloromethane (2 x 40 mL) gave the title product as an off-white solid (18.5 g; yield = 72 percent). 1H NMR (300 MHz, CDCl3) delta: 7.68 (d, / = 15.6 Hz, 1 H), 7.15- 7.45 (m, 3 H), 7.19 (d, J = 15.6 Hz, 1 H), 4.00 (m, 1 H), 3.55 (q, J1 =13.8 Hz, J2 = 24.0 Hz ), 2.18 (m, 2 H), 1.93 (m, 2 H), 1.37-1.48 (m, 2 H), 1.22 (s, 3 H), 0.96 (s, 3 H).

The chemical industry reduces the impact on the environment during synthesis,94594-90-8,(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide,I believe this compound will play a more active role in future production and life.

Reference：
Patent; AUSPEX PHARMACEUTICALS, INC.; RAO, Tadimeti; ZHANG, Chengzhi; WO2011/17108; (2011); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4 its synthesis route is as follows.

A solution of thiosaccharin (tsacH) (0.04 g, 0.24 mmol) in methanol (8 cm3) was added to a solution of K2[PtCl4] (0.05 g, 0.12 mmol) in water (3 cm3). The orange mixture was heated at reflux on a steam bath for 2 h. After cooling to room temperature the brown solid formed was filtered off, washed with water and dried in a vacuum oven to give 1 (0.049 g, 70%). 1H NMR (d6-dmso): delta 8.50 (d, J 7.0 Hz, 2H), 8.86 (d, J 6.8 Hz, 2H), 7.76 (m, 4H); IR v/cm-1; IR(KBr) 3085w, 1419s, 1340vs, 1100vs, 1012s, 804vs, 366m cm-1; Elemental Anal. Calc. for PtS4N2O4C14H8·H2O. Found: C, 27.58 (27.63); H, 1.64 (1.49); N, 4.60 (4.59)%.

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference：
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

TsacH (63mg, 0.32mmol) was added to a cyclohexane solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) and the reaction mixture was heated to reflux for 30min. The reaction mixture was then allowed to cool at room temperature. The solvent was removed under reduced pressure and the residue separated by TLC on silica gel. Elution with n-hexane/CH2Cl2 (v/v, 1:1) developed a yellow-orange band corresponding to [HRu5(CO)15(mu-N,S-tsac)(mu5-S)] (5). The product was recrystallized from n-hexane/CH2Cl2 at 4C to afford 5 as red crystals (18mg, 17%). Data for 5: Anal. Calc. for C22H5NO17Ru5S3: C, 22.84; H, 0.44; N, 1.21. Found: C, 23.14; H, 0.48; N, 1.23%. IR (nuCO, CH2Cl2): 2106w, 2083s, 2071vs, 2034s, 2014s, 1967w cm-1. 1H NMR (CDCl3): delta 7.88 (d, J 7.6Hz, 1H), 7.81 (t, J 7.6Hz, 1H), 7.72 (d, J 7.6Hz, 1H), 7.66 (t, 7.6Hz, 1H),-17.87 (s, 1H).

The chemical industry reduces the impact on the environment during synthesis,27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference：
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com