Day: March 15, 2021

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

Step A: Methyl 2-[(1,1-dioxo-1,2-benzoisothiazol-3-yl)thio]-3-(4-benzyloxyphenyl)propionate The solution of 0.3 g (0.001 mol) of methyl 3-[4-(benzyloxy)phenyl]-2-chloropropionate in methanol (2 ml) was added dropwise to the solution of 0.2 g (0.001 mol) 1,1-dioxo-1,2-benzoisothiazol-3(2H)-thione (thiosaccharine) and 0.04 g (0.001 mol) NaOH in methanol (3 ml). The solution thus obtained was heated at reflux for 5 h. The crude product obtained after evaporating the solvent was used without purification in the next step of the synthesis.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 27148-03-4, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide

Reference£º
Patent; ADAMED, Sp. z.o.o.; US2006/160870; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

PREPARATION 3 3-(1-Piperazinyl)-1,2-benzisothiazole odsold; hydrochloride Anhydrous piperazine (49.4 g, 0.57 mol) and t-butanol (10 mL) were added to a dry, 300 mL round bottom flask equipped with a mechanical stirrer, thermometer, condenser topped with a nitrogen inlet, and pressure-equalizing dropping funnel. After the flask was purged with nitrogen, it was heated to 100¡ã C. in an oil bath. A solution of 3-chloro-1,2-benzisothiazole (19.45 g, 0.11 mol) in t-butanol (10 mL) was added to the addition funnel, and then slowly added to the reaction flask over 20 minutes to moderate an exothermic reaction (112-118¡ã C.). Once addition was complete the yellow solution was heated to reflux (121 ¡ãC.) and then maintained at reflux for 24 hours. Thin-layer chromatography showed that the reaction was complete. The reaction mixture was cooled to 85¡ã C. and 120 mL of water was added. The hazy solution was filtered and the filter cake rinsed with 60 mL of t-butanol/water (1:1) solution. The pH of the combined filtrate and wash was adjusted to 12.2 with 50percent aqueous caustic. The aqueous solution was extracted with toluene (200 mL), the layers were separated, and the aqueous layer was extracted with fresh toluene (100 mL). The combined toluene layers were washed with water (75 mL), and then the toluene solution was concentrated in vacuo at 48¡ã C. to 90 mL. Isopropanol (210 mL) was added to the concentrate and then the pH was slowly adjusted to 3.8 with 7.6 mL of concentrated hydrochloric acid. The resulting slurry was cooled to 0¡ã C., granulated for 45 min, and then filtered. The filter cake was washed with cold isopropanol (50 mL) and then dried in vacuo at 40¡ã C. to afford 23.59 g (80percent yield) of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride as an off white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Chlorobenzo[d]isothiazole, 7716-66-7

Reference£º
Patent; Pfizer Inc.; US5935960; (1999); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 6-Bromobenzo[d]isothiazole-3-carboxylic acid, and cas is 677304-75-5, its synthesis route is as follows.

The following procedure was used to prepare benzisothiazole tert-butyl esters: Di-tert-butyldicarbonate (128 mmol) was added to a suspension of 6-bromo-1,2-benzisothiazole-3-carboxylic acid (46.5 mmol) and 4-dimethylaminopyridine (4.26 mmol) in tert-butyl alcohol (40.0 mL) and tetrahydrofuran (40.0 mL) and the reaction mixture was heated at 65 C. for 16 hours. There was vigorous carbon dioxide evolution which gradually subsided as the mixture become homogeneous. The reaction mixture was concentrated and the residue was dissolved in dichloromethane. The dichloromethane solution was filtered through silica gel (ca. 50 g) and the eluent was concentrated to provide the ester product in 99% yield.

677304-75-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,677304-75-5 ,6-Bromobenzo[d]isothiazole-3-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Schumacher, Richard; Danca, Mihaela Diana; Ma, Jianguo; Herbert, Brian; Nguyen, True Minh; Xie, Wenge; Tehim, Ashok; US2007/78147; (2007); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid, and cas is 18480-53-0, its synthesis route is as follows.

In a 250 ml round bottom flask in water are sequentially added methanol 80 ml, 3,4-dichloro-thiazole-5-carboxylic acid (10.7 g, 53.8 mmol), gradually under the condition ice bath adds by drops two chlorine Asia sulphone (9.6 g, 80.7 mmol), the drop finishes heated to 40 degree c stirring 5 hours, after the reaction is complete to concentrate, add ethyl acetate to dissolve the filter, the filtrate of the distilled water are used to, saturated NaHCO3saturated NaCl wash again, anhydrous magnesium sulphate dried, concentrated, vacuum drying the white solid obtained 11.2 g, yield 98percent

18480-53-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,18480-53-0 ,3,4-Dichloroisothiazole-5-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Nankai University; Fan, Zi Jin; Zong, guangning; Li, Feng Yun; Li, yuedong; Li, Juan Juan; Ji, xiaotian; Chen, Lai; Zhu, Yu Jie; Liu, chaolun; Cheng, shengming; (21 pag.)CN103497182; (2016); B;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 288-16-4, its synthesis route is as follows.

Under nitrogen protection, compound 1 was added(20 g, 0.235 mol) was added to dry 100 ml of ether and stirred and dissolvedTemperature below 0 ,To this was added n-butyllithium (0.24 mol), and the mixture was kept at 0 C or less during the dropping,After the dropwise addition, the incubation reaction was carried out until no compound 1 was added.To the reaction solution was added bromine (0.5 mol)The reaction mixture was kept at 0 C or lower, and the mixture was slowly added to the room temperature after completion of the dropwise addition. After stirring for half an hour, the reaction was quenched by adding hydrochloric acid solution (2N, 500 ml) thereto.And the aqueous phase was extracted with ether (200 ml * 3) and discarded. The organic phase was combined and washed with sodium dithionite solution(100 ml * 2), dried over anhydrous sodium sulfate, filtered and concentrated to dryness to give compound 2 as a yellow oil.

288-16-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,288-16-4 ,Isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890179; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4 its synthesis route is as follows.

A CH2Cl2 solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) and tsacH (63mg, 0.32mmol) was heated to reflux for 8h during which time the color of the solution changed from yellow to deep red. The reaction mixture was then allowed to cool at room temperature, and the solvent was removed under reduced pressure. The residue was separated by TLC on silica gel using a binary eluent composed of n-hexane/CH2Cl2 (v/v, 1:1), yielding a single yellow band corresponding to [Ru2(CO)6(mu-N,S-tsac)2] (1). The product was recrystallized from n-hexane/CH2Cl2 at 4C and furnished orange crystals of analytically pure 1 in 12% yield (14mg). Data for 1: Anal. Calc. for C20H8N2O10Ru2S4: C, 31.33; H, 1.05; N, 3.65. Found: C, 31.64; H, 1.12; N, 3.69%. IR (nuCO, CH2Cl2): 2102s, 2075vs, 2032sh, 2027s, 1961w cm-1. 1H NMR (CDCl3): delta 8.01 (d, J 7.2Hz, 2H), 7.88 (d, J 7.2Hz, 2H), 7.78 (t, J 7.2Hz, 2H), 7.73 (t, J 7.2Hz, 2H).

27148-03-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,27148-03-4 ,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

The chemical industry reduces the impact on the environment during synthesis,936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,I believe this compound will play a more active role in future production and life.

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide, cas is 27148-03-4,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

General procedure: For 6: A solution of thiosaccharin (tsacH) (0.06 g, 0.307 mmol) in chloroform (8 cm3) was added to a solution of [PtCl2(kappa2-dppm)] (0.10 g, 0.154 mmol) in chloroform (10 cm3). A few drops of triethylamine were added and the resulting mixture was heated under reflex for 1 h. This produced a yellow solution was filtered off and reduced to half volume. Methanol (2 cm3) was added and the mixture was set a side to evaporate slowly at room temperature. The yellow crystalline solid thus formed was filtered off and dried in a vacuum oven (0.12 g, 91%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 27148-03-4, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Chlorobenzo[d]isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 7716-66-7, its synthesis route is as follows.

EXAMPLE B4 A mixture of 3,4-dihydro-7-methoxybenzofuro[2,3-c]pyridine-2(1H)-butanamine (0.0055 mol), 3-chloro-1,2-benzisothiazole (0.0089 mol) and NaHCO3 (0.01 mol) was stirred for 1.5 hour at 120¡ã C. (melt). 1-Butanol (0.5 ml) was added. The reaction mixture was cooled, then dissolved in CH2Cl2 and purified by column chromatography over silica gel (eluent: CH2Cl2/(CH3OH/NH3) 98/2). The desired fractions were collected and the solvent was evaporated. The residue was dissolved in 2-propanone and converted into the hydrochloric acid salt (1:2) with HCl/2-propanol. The mixture was stirred at room temperature. The precipitate was filtered off and dried, yielding 1.60 g of N-(1,2-benzisothiazol-3-yl)-3,4-dihydro-7-methoxybenzofuro[2,3-c]pyridine-2(1H)-butanamine monohydrochloride monohydrate (61percent) (compound 55).

7716-66-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7716-66-7 ,3-Chlorobenzo[d]isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Janssen Pharmaceutica N.V.; US6495555; (2002); B1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3-Chlorobenzo[d]isothiazole, and cas is 7716-66-7, its synthesis route is as follows.

a) A mixture of 32 parts of ethyl 1-piperazinecarboxylate, 17 parts of 3-chloro-1,2-benzisothiazole and 45 parts of N , N -dimethylacetamide was stirred for 0.5 hour at 150¡ãC. After cooling to 50¡ãC, the reaction mixture was poured into ice water. The aqueous layer was decanted and the oily layer was stirred again in water. The product from the oily layer was extracted with trichloromethane. The extract was dried, filtered and evaporated. The residue was purified by column chromatography over silica gel using a mixture of trichloromethane and methanol (95:5 by volume) as eluent. The pure fractions were collected and the eluent was evaporated, yielding 13 parts (44percent) of ethyl 4-(1,2-benzisothiazol-3-yl)-1-piperazinecarboxylate as a residue (interm. 12).

7716-66-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7716-66-7 ,3-Chlorobenzo[d]isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; EP398425; (1990); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com