Day: November 20, 2020

Name is 3-Piperazinobenzisothiazole hydrochloride, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 87691-88-1, its synthesis route is as follows.

EXAMPLES 115-116 A-C N-{5-[2-(4-BENZO[D]ISOTHIAZOL-3-YL-PIPERAZIN-1-YL)-ETHYL]-1, 1- DIMETHYL-INDAN-2-YLl-ACETAMIDE AND N-{6-[2-(4- BENZOrDllSOTHIAZOL-3-YL-PI PERAZIN-1-YL)-ETHYL1-1, 1- DIMETHYL-INDAN-2-YLl-ACETAMIDE (RACEMATES AND (+) AND (-) ENANTIOMERS) A suspension of piperazinylbenzisothiazole hydrochloride (16.50 g, 75.3 mmol), amidoindane as a mixture of regioisomers (10.00 g, 37.63 mmol) and Na2CO3 (5.98 g, 56.4 mmol) in water (180 ml) split evenly into 6 microwave reactor vessels, were heated to 175C for 30 min under microwave assistance. Upon cooling, MS indicated only desired product with no starting chloroethyl amidoindane. The reactions were diluted with ethyl acetate and water then combined. The layers were separated and the organics washed with water (100 ml), dried (MgS04) and concentrated to a viscous residue. The regioisomers were separated by chomatography (30% ethyl acetate/Hex) and identified by NMR 2D-NOE, then each stereoisomer was separated using chiral HPLC from a portion of each racemate and finally isolated as its HCI salt. Total reaction conversion was 95% based on recovered desired products. ; EXAMPLE 115 A; 11f5-f2- (4-BENZOf D11SOTHIAZOL-3-YL-PIPERAZIN-1-YL)-ETHYL1-1, 1- DIMETHYL-INDAN-2-YLl-ACETAMIDE 1H NMR (400 MHz, DMSO-D6) 8 ppm 0.94 (s, 3 H) 1.16 (s, 3 H) 1.84 (s, 3 H) 2.56 (m, 2 H) 2.68 (q, J=13. 35 Hz, 7 H) 2.95 (dd, J=15. 63,7. 62 Hz, 1 H) 3.43 (s, 4 H) 4.24 (q, J=8.60 Hz, 1 H) 7.02 (s, 3 H) 7.40 (t, J=7. 62 Hz, 1 H) 7.52 (t, J=7.52 Hz, 1 H) 7.95 (d, J=8.99 Hz, 1 H) 8.01 (dd, J=8. 21,3. 52 Hz, 2 H) chiral HPLC: two enantiomers, retention time (r. t. ) 9.78 and 19.73min., ChiralCel OJ (250×4.6mm), 80: 20 Hexane/EtOH; LCMS: Phenomenex Develosil Combi RP3 50×4.6mm column, 45C, 90-2% H20/MeCN w/0. 1 % HC02H over 3.5min, hold 0.5min, total run time 4. 0min. Results: 100% purity 254nM, M+= 449, r. t. = 2. 68min; EXAMPLE 116A; ll-f6-r2- (4-BENZOf D11SOTHIAZOL-3-YL-PI PERAZIN-1-YL)-ETHYL1-1, 1- DIMETHYL-INDAN-2-YLT-ACETAMIDE 1H NMR (400 MHz, DMSO-D6) 8 ppm 0.95 (s, 3 H) 1.17 (s, 3 H) 1.84 (s, 3 H) 2.56 (m, 2 H) 2.69 (m, 7 H) 2.94 (dd, J=15. 43,8. 01 Hz, 1 H) 3.42 (s, 4 H) 4.25 (q, J=8.66 Hz, 1 H) 6.98 (d, J=7.46Hz, 1 H) 7.00 (s, 1 H, NOE with 1. 17ppm, s, 3H) 7.05 (d, J=7.43Hz, 1 H, NOE with 2.69ppm, m, 7H) 7.40 (t, J=7. 72 Hz, 1 H) 7.52 (m, 1 H) 7.93 (d, J=9. 18 Hz, 1 H) 8.01 (d, J=8.21 Hz, 2 H) chiral HPLC: two enantiomers r. t. 7.28 and 15. 51 min., Chiralcel OJ (250×4.6mm), 80: 20 Hex/EtOH ; LCMS: Phenomenex Develosil Combi RP3 50×4.6mm column, 45C, 90-2% H20/MeCN w/0. 1 % HC02H over 3.5min, hold 0.5min, total run time 4. 0min. Results: 100% purity 254nM, M+= 449, r. t. = 2.64min.

87691-88-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,87691-88-1 ,3-Piperazinobenzisothiazole hydrochloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC?; WO2005/56540; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 63 3-(4-(1-(1,2-Benzisothiazol-3-yl)-4-piperazinyl)butyl)-5-(2,2,2-trifluorethyl)-4-thiazolidinone hydrochloride A mixture of 3-(4-bromobutyl)-5-(2,2,2-trifluoroethyl)-4-thiazolidinone (3.20 g), 1-(1,2-benzisothiazol-3-yl)piperazine hydrochloride (2.81 g), K2 CO3 (4.83 g) and NaI (250 mg) in acetonitrile (280 ml) was heated at 70 C. for 15 hours and the product was processed in substantially the same manner as in Example 10 to afford 2.30 g of crystals, m.p. 188-200 C. ANALYSIS: Calculated for C20 H25 F3 N4 OS2 ¡¤HCl: 48.52% C; 5.29% H; 11.32% N; 7.16% Cl. Found: 48.51% C; 5.32% H; 11.20 % N; 7.28% Cl.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3-Piperazinobenzisothiazole hydrochloride, 87691-88-1

Reference£º
Patent; Hoechst-Roussel Pharmaceuticals Inc.; US4933453; (1990); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

94594-90-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

In a round-bottomed flask, 80 g of (1S)-(-)-2,10-camphorsultam, 236.4 g of methyl tert-butyl ether, 2.27 g of 4-(dimethylamino)-pyridine and 41.36 g of triethylamine were placed, and to this, 63.46 g of capryloyl chloride was added dropwise at room temperature. After stirring for 1 hour, the reaction solution was added to a mixed solution of 7.75 g of 35percent hydrochloric acid and 200 g of water, and the organic layer was separated. The organic layer was washed with 25percent aqueous sodium hydroxide solution and subsequently with water, and concentrated under reduced pressure. Thus, 125.34 g of the titled compound was obtained (quality: 99.7percent measured by GC).Gas chromatography analysis was carried out using Shimadzu GC-14A (Column: 5percent Silicone OV-17 manufactured by GL Science, Detector: FID).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, 94594-90-8

Reference£º
Patent; Yamazaki, Shigeya; Hosoya, Takeshi; US2009/118542; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

18480-53-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3,4-Dichloroisothiazole-5-carboxylic acid, cas is 18480-53-0,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

In a 250 ml single-mouth round bottom flask, 7.8 g of 3,4-dichloroisothiazole-5-carboxylic acid and 50 ml of thionyl chloride were added.The NaOH lye was inserted above the return pipe to absorb volatile thionyl chloride and refluxed at 80¡ãC for 5 hours.The solution turns light yellowRemove unreacted thionyl chloride by atmospheric pressure at 74¡ãC,Then vacuum distillation to collect 128 ¡ãCThe fraction yielded 5.9 g of colorless 3,4-dichloroisothiazole-5-formyl chloride,Using the resulting pure product to calculate the yield,Yield 69.3percent;

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 3,4-Dichloroisothiazole-5-carboxylic acid, 18480-53-0

Reference£º
Patent; Nankai University; Fan Zhijin; Zong Guangning; Ma Liuyong; Li Fengyun; Zhu Yujie; Chen Lai; Wang Haixia; Qian Xiaolin; Guo Xiaofeng; Pei Yu; Xu Jinghua; (21 pag.)CN104974150; (2018); B;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 288-16-4, its synthesis route is as follows.

EXAMPLE 15 6-Cyano-1-hydroxy-1-(5-isothiazolyl)-1,2,3,4-tetrahydronaphthalene Analogously to Example 12, the crude title compound is obtained starting from 353 mg of isothiazole, 0.632 ml of diisopropylamine, 3 ml of 1.6M n-butyllithium in hexane and 546 mg of 6-cyano-1-tetralone in 38 ml of THF. It is purified by column chromatography (SiO2, hexane/ethyl acetate 4:1) and crystallisation from hexane; m.p. 182-184; 1 H-NMR (d6 -DMSO): delta(ppm)=1.76 and 1.97 (2m,4H), 2.9 (t,2H), 6.65 (s,1H), 6.93 (d,1H), 7.37 (dd,1H), 7.59 (dd,1H), 7.7 (d,1H), 8.39 (d,1H).

288-16-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,288-16-4 ,Isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Ciba-Geigy Corporation; US5246952; (1993); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3-Chlorobenzo[d]isothiazole, cas is 7716-66-7,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

10.2 grams of piperidine,Mix 4.0 g of 3-chloro-1,2-benzothiazole and 10 ml of ethanol and mix at 80 ¡ã C under refluxAfter 18 hours, it was cooled, poured into water, separated with 100 ml of water and 200 ml of toluene, and the organic phase was washed with 100 ml of water. Dry, filter, concentrate to 20 ml, and refrigerate overnight (0-5 ¡ã C) in the refrigerator. Precipitation appeared, filtered to give a white solid, yield79.6percent.

The chemical industry reduces the impact on the environment during synthesis,7716-66-7,3-Chlorobenzo[d]isothiazole,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Capital University of Medical Sciences; Jin Zengliang; Gao Nana; Zheng Yuanyuan; Xu Huanli; Li Xiaorong; Xiong Jie; (20 pag.)CN108440520; (2018); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid, and cas is 18480-53-0, its synthesis route is as follows.

To 4.0 g (20.3 mmol) of 3,4-dichloroisothiazole-5-carboxylic acid were added 8 ml of oxalyl chloride and a catalytic amount of DMF, followed by stirring at 50¡ãC for 30 minutes to give rise to a reaction. The reaction mixture was concentrated under vacuum to obtain 3,4-dichloroisothiazole-5-carbonyl chloride. 1.9 g (50.5 mmol) of sodium borohydride was suspended in 40 ml of water. To the resulting suspension was dropwise added, at 10 to 15¡ãC, a solution of the 3,4-dichloroisothiazole-5-carbonyl chloride dissolved in THF (4 ml). Stirring was conducted at 15¡ãC for 30 minutes. Then, an aqueous citric acid solution was added to make the mixture weakly acidic and extraction with ethyl acetate was conducted. The organic layer was washed with water, dried over anhydrous magnesium sulfate, and concentrated. The resulting crystals were washed with hexane to obtain 3.0 g (yield: 81percent) of (3,4-dichloroisothiazol-5-yl)methanol as colorless crystals (melting point: 94 to 95¡ãC). 1H-NMR (CDCl3) delta: 2.28 (1H, bs), 4.96 (2H, s) ppm In 6 ml of acetonitrile were dissolved 0.62 g (3.10 mmol) of 3-chloro-1,2-benzoisothiazole 1,1-dioxide and 0.57 g (3.10 mmol) of the (3,4-dichloroisothiazol-5-yl)methanol. To the resulting solution was dropwise added 0.34 g (3.4 mmol) of triethylamine, followed by stirring at room temperature for 5 hours to give rise to a reaction. After the completion of the reaction, 12 ml of water was added. The resulting crystals were obtained by filtration. The crystals were washed with water and isopropyl alcohol to obtain 0.89 g (yield: 82percent) of 3-(3,4-dichloroisothiazol-5-ylmethoxy)-1,2-benzoisothiazole 1,1-dioxide as a colorless powder (melting point: 165 to 167¡ãC). 1H-NMR (CDCl3) delta: 5.79 (2H, s), 7.73-7.94 (4H, m) ppm.

18480-53-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,18480-53-0 ,3,4-Dichloroisothiazole-5-carboxylic acid, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; KUMIAI CHEMICAL INDUSTRY CO., LTD.; IHARA CHEMICAL INDUSTRY CO., LTD.; EP2017268; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

It is a common heterocyclic compound, the isothiazole compound, Isothiazole, cas is 288-16-4 its synthesis route is as follows.

Under nitrogen protection, compound 1 was added(20 g, 0.235 mol) was added to dry 100 ml of ether and stirred to dissolve,And then cooled to below 0 ,To this was added n-butyllithium (0.24 mol)During the dropping process, the temperature was kept below 0 C,After the dropwise addition, the incubation reaction was carried out until no compound 1 was added.To the reaction solution was added bromine (0.5 mol)During the dropping process, the temperature was kept below 0 C,After completion of the dropwise addition, the temperature was gradually raised to room temperature, and after stirring for half an hour, the reaction was quenched by adding thereto a hydrochloric acid solution (2N, 500 ml). (100ml * 2), dried over anhydrous sodium sulfate, filtered and concentrated to dryness. After drying, the aqueous phase was washed with diethyl ether (200ml * 3) and extracted.To give the yellow oily compound 2.

288-16-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,288-16-4 ,Isothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890175; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 4-Bromoisothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 24340-77-0, its synthesis route is as follows.

To a reaction flask were added compound 5 (200 mg, 0.392 mmol), 4-bromoisothiazole (96 mg, 0.588 mmol), Pd(dppf)Cl2 (32 mg, 0.02 mmol) and sodium carbonate (126 mg, 1.18 mmol), 2 mL glycol dimethyl ether and 0.4 mL water were added, bubbled with nitrogen gas for 10 minutes, and the reaction was heated to 120 C in microwace for half an hour. After TLC detected the reaction was complete, the reaction was concentrated, purified by silica gel column chromatography to afford 58 mg of a product, yield: 31.7%. LC-MS(APCI): m/z = 467.3(M+1)+; 1H NMR (400 MHz, DMSO) delta 10.17 (s, 1H), 9.04 (s, 1H), 8.76 (d, J = 2.3 Hz, 1H), 8.70 (s, 1H), 8.05 (d, J = 2.3 Hz, 1H), 7.86 (d, J = 9.1 Hz, 2H), 7.33 (d, J = 8.8 Hz, 2H), 4.86 (d, J = 3.4 Hz, 1H), 4.21 (s, 1H), 3.41 (dd, J = 17.0, 9.3 Hz, 1H), 3.29 – 3.18 (m, 2H), 2.90 (d, J = 11.1 Hz, 1H), 1.89 – 1.80 (m, 1H), 1.75 (s, 1H).

24340-77-0, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,24340-77-0 ,4-Bromoisothiazole, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Shenzhen Targetrx, Inc.; WANG, Yihan; ZHAO, Jiuyang; AL, Yixin; (51 pag.)EP3553057; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

10271-85-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Isothiazole-5-carboxylic acid, cas is 10271-85-9,the isothiazole compound, it is a common compound, a new synthetic route is introduced below.

A solution of 5-isothiazolecarboxylic acid (500 mg, 3.87 mmol, commercially available from e.g. Fluorochem or Astatech) in dry Dichloromethane (DCM) (12.9 ml) was stirred at room temperature under an atmosphere of argon. EDC (891 mg, 4.65 mmol) and HOBt (296 mg, 1.936 mmol) were added to the stirred solution. The resulting solution was stirred at room temperature under an atmosphere of argon for 1/2 hour. After this time, 1 ,1-dimethylethyl hydrazinecarboxylate (614 mg, 4.65 mmol) was added and the solution was stirred for a further 18 hours at room temperature (overnight). The solution was diluted with DCM (approx 30 ml) and washed with water (2 x 20ml). The organics were dried over MgSO4, filtered and concentrated under reduced pressure to give a brown coloured oil. The oil was chromatographed [Sitheta2, EtOAc/Hexane 0-100%] to give a thick, yellow-coloured oil which solidified on standing to afford the product in 480 mg. The residue was used directly in the next step. LCMS [M+H]+ 244.14 (at) 0.66 min (2 min run).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Isothiazole-5-carboxylic acid, 10271-85-9

Reference£º
Patent; GLAXO GROUP LIMITED; DEAN, David Kenneth; MUNOZ-MURIEDAS, Jorge; SIME, Mairi; STEADMAN, Jon Graham Anthony; THEWLIS, Rachel Elizabeth Anne; TRANI, Giancarlo; WALTER, Daryl Simon; WO2010/125102; (2010); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com