Day: November 12, 2020

3-Piperazinobenzisothiazole hydrochloride, cas is 87691-88-1, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,87691-88-1

3) To 0.5 g of the product of step 2) were added 0.6 g of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride, 2 g of anhydrous potassium carbonate, 0.2 g of potassium iodide and 25 ml of acetonitrile, and the mixture was heated under reflux for 20 hours, and then cooled to room temperature and filtrated. The solvent was distilled to give yellowish oil, which was passed through a column to give 0.52 g of white solid. Melting point: 110-112C, yield: 72.2%. 1H NMR(CDCl3) delta 1.75-1.90(m,4H), 2.38(s,3H), 2.51(t,2H,J=14.4Hz), 2.68-2.71(m,4H), 3.56-3.58 (m, 4H), 4.06 (t, 2H, J=12Hz), 6.11 (s, 1H), 6.80-6.86 (m, 2H), 7.29-7.36 (m, 1H), 7.43-7.48(m,2H), 7.79(d,1H,J=8Hz), 7.90 (d,1H,J=8.4Hz) MS(ESI)m/z 450.2 ([M+H]+)

With the rapid development of chemical substances, we look forward to future research findings about 3-Piperazinobenzisothiazole hydrochloride

Reference£º
Patent; Huazhong University of Science and Technology; NHWA Pharma. Corporation; ZHANG, Guisen; CHEN, Yin; XU, Xiangqing; LIU, Bifeng; LIU, Xin; ZHAO, Song; LIU, Shicheng; YU, Minquan; ZHANG, Heng; LIU, Xinghua; EP2698369; (2014); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Chlorobenzo[d]isothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 7716-66-7, its synthesis route is as follows.,7716-66-7

A dry 2-neck 500 mL round-bottom flask (RBF) was charged with sodium ethanolate (46.2 mL, 124 mmol), diluted with 151 mL absolute EtOH, cooled in an ice bath and treated dropwise with diethyl malonate (17.98 mL, 118 mmol) under an atmosphere of nitrogen. After stirring for 20 minutes, the ice bath was removed and 3-chlorobenzo[d]isothiazole (20.0 g, 118 mmol) was added in one portion and stirred for 24 hours. The reaction solution was quenched with water, extracted with ether and treated with excess 4 M HCl/dioxane. A pinkish-white precipitate was filtered off, suspended in water, basified with Na2CO3, extracted with ether, washed with water and brine, dried over sodium sulfate, filtered and concentrated to yellow solids (?20 g) which were recrystallized from ethanol/water and dried in a vacuum oven at 60¡ãC for 3 hrs to give ethyl 3-aminobenzo[b]thiophene-2-carboxylate (19.9 g, 76percent yield).

With the complex challenges of chemical substances, we look forward to future research findings about 3-Chlorobenzo[d]isothiazole

Reference£º
Patent; Universal Display Corporation; Xia, Chuanjun; Joseph, Scott; EP2826781; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Isothiazole-4-carboxylic acid, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 822-82-2, its synthesis route is as follows.,822-82-2

A solution of Example 9b (0.19 M in N,N-dimethylacetamide, 237 muL, 0.045 mmol), N,N-diisopropylethylamine (0.21 M in N,N-dimethylacetamide, 262 muL, 0.055 mmol), HATU (0.21 M in N,N-dimethylacetamide, 238 muL, 0.05 mmol), and isothiazole-4-carboxylic acid (0.4M in N,N-dimethylacetamide, 125 muL, 0.05 mmol) were aspirated from their respective source vials, mixed through a perfluoroalkoxy alkanes mixing tube (0.2 mm inner diameter), and loaded into an injection loop. The reaction segment was injected into the flow reactor (Hastelloy coil, 0.75 mm inner diameter, 1.8 mL internal volume) set at 100 C., and passed through the reactor at 180 muL min-1 (10 minute residence time). Upon exiting the reactor, the reaction was loaded directly into an injection loop and purified using preparative HPLC to yield the title compound (9.95 mg, 49.50% yield). Samples were purified by preparative HPLC on a Phenomenex Luna C8 (2) 5 mum 100 AXIA column (50 mm¡Á21.2 mm). A gradient of acetonitrile (A) and 0.1% trifluoroacetic acid in water (B) was used, at a flow rate of 30 mL/min (0-0.5 minutes 5% A, 0.5-6.5 minutes linear gradient 5-60% A, 6.5-7.0 minutes linear gradient 60-100% A, 7.0-8.9 minutes 100% A, 8.9-9.0 minutes linear gradient 100-5% A, 9.0-10 minutes 5% A). A sample volume of 1.0 mL was injected directly from the flow reactor stream to the HPLC system. A custom purification system was used, consisting of the following modules: Gilson 305 and 306 pumps; Gilson 806 Manometric module; Gilson UV/Vis 155 detector; Gilson 506C interface box; Gilson FC204 fraction collector; Agilent G1968D Active Splitter; Thermo MSQ Plus mass spectrometer. The system was controlled through a combination of Thermo Xcalibur 2.0.7 software and a custom application written in-house using Microsoft Visual Basic 6.0. 1H NMR (400 MHz, DMSO-d6) delta 4.69 (d, J=3.9 Hz, 2H), 5.62 (s, 2H), 6.43 (s, 1H), 6.84 (d, J=2.0 Hz, 1H), 7.51 (d, J=2.0 Hz, 1H), 8.18 (s, 1H), 8.32 (s, 1H), 8.96 (s, 1H), 9.59 (s, 1H). MS (APCI) m/z 439.1 [M+H]+.

With the complex challenges of chemical substances, we look forward to future research findings about Isothiazole-4-carboxylic acid

Reference£º
Patent; AbbVie Inc.; Dai, Yujia; McClellan, William; Michaelides, Mike; Sweis, Ramzi; Wilson, Noel; Dietrich, Justin; (90 pag.)US2017/174688; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Piperazinobenzisothiazole hydrochloride, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 87691-88-1, its synthesis route is as follows.,87691-88-1

Excess dried, -325 mesh potassium carbonate (20 G) was diluted in 500 mL acetone and 3-PIPERAZIN-1-YL-BENZOISOTHIAZOLE hydrochloride (13.05 G, 51.2 mmol) was added. The mixture was stirred for 15 min before 4-nitrophenethyl tosylat (14.93 G, 46. 5 MMOL) and catalytic 18- crown-6 (0.5 g, 1.9 MMOL) was added. The mixture was stirred at reflux for 42 h. After cooling, the salts were filtered off and washed with acetone and the filtrate was concentrated. The residue was taken up in methylene chloride and washed with water. The organic layer was dried over sodium sulfate, and concentrated. The residue was triturated with ethyl acetate and the collected solid was washed with ethyl ether and dried in vacuo to afford 14.86 g of a bright yellow solid. Yield 84%; mp 99 C ; MS (APCI) : 369 [M+H] +.

With the complex challenges of chemical substances, we look forward to future research findings about 3-Piperazinobenzisothiazole hydrochloride

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/41793; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

4-Bromoisothiazole, cas is 24340-77-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,24340-77-0

a) 6- (Isothiazol-4-yl)-8- ((2- (trimethylsilyl)ethoxy)methoxy)-3- ((2- (trimethylsilyl)ethoxy)methyl)guinazolin-4(3H)-oneA suspension of 4-bromo-isothiazole (0.02 g, 0.1 mmol), (6- (4,4,5 ,5-tetramethyl- 1,3,2- dioxaborolan-2-yl)-8- ((2- (trimethylsilyl)ethoxy)methoxy)-3-((2-(trimethylsilyl)ethoxy)methyl)quinazolin-4(3H)-one (0.05 g, 0.08 mmol, example 28), bis (diphenylphosphino)feffocene-palladium(II)dichloride (0.01 g, 0.01 mmol), potassium carbonate (0.03 g, 0.25 mmol) and water (0.2 ml) in dimethylformamide (1 ml) was stirred in a sealed tube at 100 C for 2 hours and then at 80 C overnight. Filtration and chromatography (C18 reverse phase HPLC, methanol / water (0.1% formic acid) = 40:60 to 100:0) yielded thetitle compound as white solid (0.01 g, 16 %). MS: mle = 506.7 [M+Hf?.

24340-77-0 is used more and more widely, we look forward to future research findings about 4-Bromoisothiazole

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BISSANTZ, Caterina; BONNAFOUS, Rene; BUETTELMANN, Bernd; JAKOB-ROETNE, Roland; LERNER, Christian; RUDOLPH, Markus; WO2014/102233; (2014); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO124,mainly used in chemical industry, its synthesis route is as follows.,27148-03-4

A solution of tsac (0.051 g, 0.26 mmol) in MeOH (5 cm3)was added to a solution of 1 (0.051 g, 0.13 mmol) inMeOH (10 cm3). The mixture was stirred at 30 C for 2 h.The yellow-orange solid formed was collected by filtrationand dried under vacuum. Yield 0.068 g, 75%. Anal. Calc.for C28H26N4O4PdS4: C, 46.9, H, 3.7, N, 7.8. Found: C,46.9, H, 3.8, N, 8.0. Molar conductivity (DMSO): 0.40(X-1 mol-1 cm-1). IR (KBr): 3425sb, 3051w, 2922w,1541m, 1463m, 1384s, 1163s, 1004m, 806m, 370s cm-1.1H NMR (DMSO-d6): d 7.89 (dd, J 8.0, J 3.2, 4H, tsac),7.71 (t, J 8.0, 2H, tsac), 7.58 (t, J 8.0, 2H, tsac), 7.29 (s,10H, Ph), 4.58 (bs, 4H, 2NH2), 3.69 (s, 4H, 2CH2) ppm.

With the complex challenges of chemical substances, we look forward to future research findings about Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,belong isothiazole compound

Reference£º
Article; Al-Jibori, Subhi A.; Hameed, Wisam J.; Al-Hayaly, Lamaan J.; Wagner, Christoph; Hogarth, Graeme; Transition Metal Chemistry; vol. 42; 1; (2017); p. 79 – 84;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is Isothiazole-4-carboxylic acid, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 822-82-2, its synthesis route is as follows.,822-82-2

solution of 1 ,2-thiazole-4-carboxylic acid (36 mg, 0.28 mmol) and HATU (105 mg, 0,28 mmol) in DMA (1 mL) was added to a mixture of N-{4-[4-oxo-3-(phenylamino)-4,5,6,7- tetrahydro-1 H-pyrrolo[2,3-c]pyridin-2-yl]pyridin-2-yl}acetamide (24; 50 mg, 0.14 mmol) and DIPEA (48 pL, 0.28 mmol) in DMA (1 mL) and stirred for 16 h at 50X. The mixture was concentrated and purified by preparative HPLC (basic method) to give the title compound (37 mg, 54%). 1H-NMR (400 MHz, DMSO-d6), delta [ppm]= 2.08 (3H), 4.14+4.34 (2H), 4.90+5.08 (2H), 6.58 (2H), 6.60 (1 H), 7.03 (2H), 7.21 (1 H), 7.45 (1 H), 8.13 (1 H), 8.23+8.29 (1 H), 8.71 +8.80 (1 H), 9.35+9.45 (1 H), 10.41 (1 H), 12.07+12.36 (1 H)

With the complex challenges of chemical substances, we look forward to future research findings about Isothiazole-4-carboxylic acid

Reference£º
Patent; BAYER PHARMA AKTIENGESELLSCHAFT; GRAHAM, Keith; KLAR, Ulrich; BRIEM, Hans; SIEMEISTER, Gerhard; MOeNNING, Ursula; VON NUSSBAUM, Franz; (332 pag.)WO2017/102649; (2017); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Piperazinobenzisothiazole hydrochloride, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 87691-88-1, its synthesis route is as follows.,87691-88-1

N- [4- (2-CHLORO-ETHYL)-2-METHYL-PHENYL]-N-METHYL-ACETAMIDE (0.300 g, 1. 153 mmol), 3-PIPERAZIN-1-YL-BENZO [d] isothiazole hydrochloride (0.442 g, 1.729 MMOL), potassium carbonate (0.237 g, 1.729 MMOL), and potassium iodide (0.173 g, 1.153 MMOL) in ACETONITRILE (3.5 mL) was subjected to 150 C for 30 min. under microwave assistance using a Smith Personal Chemistry microwave. The reaction was diluted with H20 (50 mL) and CH2CI2 (100 mL). The layers were separated and the organics washed with 1 N HCI (2x 25 mL). The aqueous layer was made basic and extracted with CH2CI2 (3X50 mL). The organics were dried (MGS04), and concentrated to a solid residue. The residue was subjected to chromatography (MEOH : CH2CI2 1 : 19) and collected as an amorphous residue and taken up in 1,4-dioxane and subjected to HCI gas for 10 min. The resulting solid was collected by filtration and dried at 50 C under high vacuum overnight (0.770 g). 100% purity at 254nm; LCMS (APCI) : 409.2 [M+H] +.

With the complex challenges of chemical substances, we look forward to future research findings about 3-Piperazinobenzisothiazole hydrochloride

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/41793; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Isothiazole-3-carboxylic acid, cas is 4576-90-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,4576-90-3

[00163] To a solution of isothiazole-3-carboxylic acid (20 mg, 0.15 mmol), EDC (32.4 mg, 0.17 mmol), HOBt (23. mg, 0.17 mmol) in DMF (0.3 mL) was added 3- amino-N-cyclopropyl-4-methyl-benzamide hydrochloride (35 mg, 0.15 mmol) followed by DIPEA (0.03 mL, 0.17 mmol). The reaction was heated at 500C for 1 h. Water (0.6 mL) was added dropwise and the reaction removed from heating. The solids were stirred overnight at room temp, filtered, and washed with water to give (42.1 mg, 91% yield). HPLC tR= 2.63 min, 99.80 % purity; LCMS 302.1 (M + H).

With the rapid development of chemical substances, we look forward to future research findings about Isothiazole-3-carboxylic acid

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; WO2008/57775; (2008); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Name is 3-Bromoisothiazole, as a common heterocyclic compound, it belongs to isothiazole compound, and cas is 55512-82-8, its synthesis route is as follows.,55512-82-8

Intermediate I-1 (15 mg, 0.045 mmol) and 3-bromoisothiazole (10.98 mg, 0.067 mmol) were dissolved in DMF (446 muL). PdCl2(dppf)-CH2Cl2 (2.187 mg, 2.68 mumol) was added and the reaction mixture was degassed by bubbling with argon for 15 minutes. Sodium carbonate (2 M, 26.8 muL, 0.054 mmol) was added and the reaction mixture was degassed for 5 minutes, then sealed and heated to 90 ¡ãC in the microwave for 30 minutes. The reaction mixture was diluted with DMF, filtered, and purified by preparative HPLC (Method D, 35 to 80percent B in 10 minutes) to give Example 5 (5.0 mg, 0.017 mmol, 37.2percent): 1H NMR (500MHz, METHANOL-d4) delta 8.89 (d, J=4.7 Hz, 1H), 8.59 (s, 1H), 8.13 (d, J=1.9 Hz, 1H), 8.10 (d, J=4.7 Hz, 1H), 7.84-7.52 (m, 2H), 2.64 (s, 3H); LC^MS: Method H, RT = 1.08 min, MS (ESI) m/z: 293.9 (M+H)+; Analytical HPLC Method B: 97.4percent purity

With the complex challenges of chemical substances, we look forward to future research findings about 3-Bromoisothiazole

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; RICHTER, Jeremy M.; ZHANG, Xiaojun; PRIESTLEY, Eldon Scott; (111 pag.)WO2018/13772; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com