Day: September 27, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,as a common compound, the synthetic route is as follows.

TsacH (63mg, 0.32mmol) was added to a cyclohexane solution (20mL) of [Ru3(CO)12] (100mg, 0.16mmol) and the reaction mixture was heated to reflux for 30min. The reaction mixture was then allowed to cool at room temperature. The solvent was removed under reduced pressure and the residue separated by TLC on silica gel. Elution with n-hexane/CH2Cl2 (v/v, 1:1) developed a yellow-orange band corresponding to [HRu5(CO)15(mu-N,S-tsac)(mu5-S)] (5). The product was recrystallized from n-hexane/CH2Cl2 at 4C to afford 5 as red crystals (18mg, 17%). Data for 5: Anal. Calc. for C22H5NO17Ru5S3: C, 22.84; H, 0.44; N, 1.21. Found: C, 23.14; H, 0.48; N, 1.23%. IR (nuCO, CH2Cl2): 2106w, 2083s, 2071vs, 2034s, 2014s, 1967w cm-1. 1H NMR (CDCl3): delta 7.88 (d, J 7.6Hz, 1H), 7.81 (t, J 7.6Hz, 1H), 7.72 (d, J 7.6Hz, 1H), 7.66 (t, 7.6Hz, 1H),-17.87 (s, 1H)., 27148-03-4

As the paragraph descriping shows that 27148-03-4 is playing an increasingly important role.

Reference£º
Article; Mia, Md. Jadu; Reza, Md. Selim; Bhoumik, Nikhil C.; Ghosh, Shishir; Nesterov, Vladimir N.; Richmond, Michael G.; Kabir, Shariff E.; Journal of Organometallic Chemistry; vol. 906; (2020);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

111248-89-6, 1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

f. 5-bromo-1,3-dihydrobenzo[c]isothiazole 2,2-dioxide 1,3-Dihydro-benzo[c]isothiazole 2,2-dioxide (0.50 g, 3.14 mmol, 1.00 eq.) was solubilized in acetic acid (5 mL) at rt under nitrogen atmosphere. Bromine (0.45 g, 3.14 mmol, 1.00 eq.) in acetic acid (5 mL) was added dropwise over 5 minutes and the reaction mixture was stirred for 0.5 h. Potassium acetate (0.28 g, 3.14 mmol, 1.00 eq.) was added and the reaction mixture was concentrated to dryness. The residue was taken in 2% NaHCO3 solution and stirred for 10 minutes. This solution was acidified to pH 2 using conc. HCl (2.5 mL) and extracted with MTBE (50 mL). The MTBE layer was washed with water (50 mL), brine solution (25 mL), dried over Na2SO4 and concentrated to get the crude product as brown solid. The crude product was triturated with petroleum ether (10 mL), filtered to a light brown solid (HPLC purity app. 86%) which was further purified by column chromatography using 60-120 mesh silica gel, 15% ethyl acetate in petroleum ether as eluent to get a yellow solid (HPLC purity app. 90%). The resulting product was then triturated with ethanol (5 mL), filtered and dried to get the title compounds as light yellow solid (0.35 g, 47.7%, 94% purity)., 111248-89-6

111248-89-6 1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide 15536009, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Merck Patent GmbH; Cancer Research Technology, Ltd.; SCHIEMANN, Kai; BLAGG, Julian; MALLINGER, Aurelie; RINK, Christian; SEJBERG, Jimmy; HONEY, Mark; (139 pag.)US2016/16951; (2016); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

27148-03-4, Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The complex was synthesized by addition of 4,4′-trimethylenedipyridine (6.2 mg, 0.031 mmol) and thiosaccharine (12.7 mg, 0.0638 mmol), respectively, to a solution of Zn(NO3)26H2O (10.2mg, 0.0342 mmol) in ethanol:water (4 ml), and kept under mechanical stirring at room temperature. The resulting yellow solid was filtered off and washed with cold water. By slow evaporation of the mother solution single crystals appeared. They were washed with water and analysed using X-ray diffraction. Yield: 82%. Molar conductivity (mS M1) = 28.3. Analytical percent composition calculated for C27H22N4O4S4Zn: C = 49.127%; H = 3.359%;N = 8.487%. Found: C = 48.811%; H = 2.981%; N = 8.378%. Soluble in DMSO and DMF. Slightly soluble in water, ethanol, methanol, chloroform. Insoluble in acetone and methane dichloride. UV-Visible [DMSO, kmax nm]: 347.1H NMR (300 MHz, DMSO) d 8.46 (dd, 4H), 7.92 (m, 2H), 7.58-7.72 (m, 6H), 7.28 (dd, 4H), 2.64 (t, 4H), 1.93 (m, 2H). 13C NMR (75 MHz, DMSO) d 191.71 (C1), 151.07 (C10), 149.31 (C8), 137.98(C7), 136.56 (C2), 132.05 (C4), 130.82 (C5), 125.07 (C3), 124.04(C9), 119.01 (C6), 33.80 (C11), 30.12 (C12)., 27148-03-4

The synthetic route of 27148-03-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Delgado, Fermin; Freire, Eleonora; Baggio, Ricardo; Gonzalez Pardo, Veronica; Dorn, Viviana; Dennehy, Mariana; Inorganica Chimica Acta; vol. 479; (2018); p. 266 – 274;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

87691-88-1, General procedure: The arylhaloketone (I) (0.1 mol) and the hydrochloride salt of piperazine (pyridinium) compound (II) (0.1 mol) were dissolved in acetonitrile (100 mL) and diisopropylethylamine (0.2 mol) was added.After 12 h at room temperature, TLC (methylene chloride_methanol=20:1) showed that the reaction of starting material (I) was complete.The solvent was concentrated to dryness, and dichloromethane (100 mL) and saturated brine (40 mL) were added and the mixture was stirred for 20 min.The organic layer was dried over anhydrous MgSO4, filtered, concentrated and purified by silica gel column chromatography (eluent:Dichloromethane/methanol = 30:1) gave intermediate (III) in a yield of 60-85% (based on arylhaloketone I).

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

Reference£º
Patent; Shanghai Pharmaceutical Industry Institute; China Pharmaceutical Industry Zongyuan; Li Jianqi; Gu Zhengsong; Xie Peng; Zhou Ainan; Xiao Ying; (31 pag.)CN107586281; (2018); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

94594-90-8, (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 2(R)-5-Methyl-4,5-dihydro-pyrazole-1 ,5-dicarboxylic acid 1 -[(4-chloro-phenyl)-amide] 5-{[2-fluoro-4- (2-oxo-2H-pyridin-1-yl)-phenyl]-amide}Step 1. Synthesis of (3aS,6R,7aR)-1-methacryloyl-8,8-dimethylhexahydro-3a,6-methano-2,1- benzisothiazole 2,2-dioxide(1 S)-(-)-2,10-camphorsultamProcedure: To a solution of (1S)-(-)-2,10-camphorsultam (1.160g, 5.388 mmoles) in toluene (10ml) was added sodium hydride (60percent in oil, 0.323g, 8.08 mmoles). Stirred for 1.5 hours Added methacryoyl chloride (1.126g, 10.78 mmoles) directly to the reaction mixture. Stirred at room temperature overnight, Evaporated, extracted into ethylacetate, washed with 1 N HCI, dried MgSO4, evaporated in vacuo and purified by chromatography (0-20percent EtOAc in hexane) to afford the desired compound (1.24Og, 81percent) 1 H NMR (400 MHz, DMSO-D6) delta ppm 0.90 (s, 3 H), 1.08 (s, 3 H), 1.23 (m 1 H), 1.42 (m, 1 H), 1.78 (m, 5 H), 1.81 (m, 3H), 3.26 (s, 4 H), 3.56 (d, J=14.04 Hz, 1 H), 3.77 (d, J=14.04 Hz, 1 H)1 3.91 (m, 1 H), 5.48 (s, 1 H)1 5.60 (s,1 H), 94594-90-8

94594-90-8 (3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide 6916014, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; PFIZER PRODUCTS INC.; WO2008/65503; (2008); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1,87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 95; 5-[3-(4-BENZO[D]ISOTHIAZOL-3-YL-PIPERAZIN-1-YL)-PROPIONYL]- 1, 1, 3, 3-TETRAMETHYL-INDAN-2-ONE; A mixture of 5- (3-Chloro-propionyl)-1, 1,3, 3-tetramethyl-indan-2-one (4.00 g, 14.4 mmol), 3-piperazin-1-yl-benzo [cisothiazole hydrochloride (3.81 g, 14.4 mmol), potassium carbonate (6.57 g, 47.5 mmol), sodium iodide (2.16 g, 14.4 mmol) in acetonitrile (250 mL) was stirred at rt for 24 h. The reaction was quenched with water (120 mL), and acetonitrile was evaporated. The residue was extracted with methylene chloride (2 x 250 mL). The combined organic extracts were washed with water, brine, dried over Na2SO4, evaporated. The residue was purified by chromatography (silica gel, 7: 3 to 1: 1 hexanes/EtOAc) to give 5- [3- (4-Benzo [dlisothiazol-3- yl-piperazin-1-yl)-propionyl]-1, 1,3, 3-tetramethyl-indan-2-one (4.60 g, 70%) as a pale yellow solid :’H NMR (300 MHz, CDCl3) 8 7.97-7. 90 (m, 3H), 7.82 (d, J = 8.1 Hz, 1 H), 7.47 (dd, J = 7.1, 0.9 Hz, 1 H), 7.39-7. 33 (m, 2H), 3.58 (t, J = 4.8 Hz, 4H), 3.27 (t, J = 7.3 Hz, 2H), 2.97 (t, J = 7.3 Hz, 2H), 2.78 (t, J = 4.9 Hz, 4H), 1.38 (s, 6H), 1.37 (s, 6H); ESI MS m/z 462 [C27H31N3O2S + H]+.

The synthetic route of 87691-88-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC?; WO2005/56540; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

10271-85-9, Isothiazole-5-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirred solution isothiazole-5-carboxylic acid 46 (1.75 g, 13.56 mmol) in CH2Cl2 (50 mL) under inert atmosphere were added N, O-dimethylhydroxylamine (1.45 g, 14.92 mmol), EDCI.HCl (2.85 g, 14.92 mmol), DMAP (1.66 g, 13.56 mmol) and N-methylmorpholine (4.1 mL, 40.69 mmol) at 0 oC, followed by warming to room temperature and stirring for 16 h. The reaction was monitored by TLC. After completion of the reaction, the reaction mixture was poured into ice-cold water, extracted with CH2Cl2. The combined organic extracts were dried over sodium sulfate, filtered and concentrated in vacuo to obtain the crude. The crude was purified through silica gel column chromatography using 2% MeOH/ CH2Cl2 to afford compound 47 (1.2 g, 52%) as brown syrup. TLC: 5% MeOH/ CH2Cl2 (Rf: 0.2); 1H NMR (400 MHz, DMSO-d6): delta 8.64 (d, J = 1.8 Hz, 1H), 7.96 (d, J = 1.8 Hz, 1H), 3.82 (s, 3H), 3.33 (s, 3H); LCMS Calculated for C6H8N2O2S: 172.03; Observed: 173.1 (M+1)+.

10271-85-9, The synthetic route of 10271-85-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASSEMBLY BIOSCIENCES, INC.; TURNER, William, W., Jr.; LI, Leping; HAYDAR, Simon, Nicolas; BURES, Mark, G.; RAI, Roopa; FRANCIS, Samson; ARNOLD, Lee, Daniel; (0 pag.)WO2018/160878; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

87691-88-1, A mixture of 10 mmol of compound (IVa) as hydrochloride and 10 mmol of compound (IVb), 30 mmol of potassium carbonate, small crystal of potassium iodide and 20 ml of Nu,Nu-dimethylformamide was stirred at room temperature until disappearance of starting materials (TLC monitoring). Usually, the reaction was carried out for 2 days. The reaction mixture was subsequently poured into 50 ml of water, and precipitate thus formed was isolated by filtration. For purification, crude product was suspended in 20 ml of methanol, then the solid was filtered off and dried to constant weight. Alternatively (for 111-8), the reaction was carried out in acetonitrile, after completion of the reaction the solvent was evaporated and product was purified by column chromatography on silica gel using chloroform/methanol 95:5 as eluent.Structures of products were confirmed by mass spectrometry.According to the above procedure the following compounds were prepared:2-(4-(4-(1 ,2-benzothiazol-3-yl)piperazin-1 -yl)butyl)-1 H-isoindole-1 ,3(2H)-dione (111- 1 ), reaction in Nu,Nu-dimethylformamide, MS: 421 [M+H+], yield: 87%;

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; ADAMED SP. Z O.O.; KO?ACZKOWSKI, Marcin; KOWALSKI, Piotr; JA?KOWSKA, Jolanta; MARCINKOWSKA, Monika; MITKA, Katarzyna; BUCKI, Adam; WESO?OWSKA, Anna; PAW?OWSKI, Maciej; WO2012/35123; (2012); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

24340-77-0, 4-Bromoisothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The above oily liquid was dissolved in 10 mL of ethylene glycol dimethyl ether and 2 mL of water, and 4-bromoisothiazole (163 mg, 0.99 mmol), Pd(PPh3)4 (29 mg, 0.025 mmol) and Na2CO3 (263 mg, 2.48 mmol), the reaction was stirred at 100 C for 2 hours under nitrogen atmosphere. After cooling to room temperature, the reaction solution was poured into 60 mL of water and extracted three times with 20 mL of ethyl acetate. The combined ethyl acetate was washed with brine and dried over anhydrous sodium sulfate. Filtered, and concentrated by column chromatography (petroleum ether / ethyl acetate 1/1) to give 43mg as a white solid powder.

24340-77-0, 24340-77-0 4-Bromoisothiazole 5200358, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Shenzhen Tajirui Bio-pharmaceutical Co., Ltd.; Wang Yihan; Zhao Jiuyang; (35 pag.)CN109651359; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

936-16-3, General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

The synthetic route of 936-16-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com