Day: September 25, 2020

2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide, cas is 936-16-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,936-16-3

General procedure: Potassium carbonate was dissolved in DMF, and 1,2-bezeneisothiazolin-1,1-dioxide (8) (1 equiv.) in dichloromethanewas added to the reaction solution, and stirred for overnight. Then,the reaction mixture was filtered through Celite, and washed with1 N HCl and saturated sodium hydrogen carbonate solution. Residualsolution was dried over magnesium sulfate, and concentratedin vacuo, and purified by column chromatography to afford the titlecompound.

As the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Article in Press; Hong, Jin Ri; Choi, Young Jin; Keum, Gyochang; Nam, Ghilsoo; Bioorganic and Medicinal Chemistry; (2017);,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

55512-82-8, 3-Bromoisothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,55512-82-8

Intermediate I-1 (15 mg, 0.045 mmol) and 3-bromoisothiazole (10.98 mg, 0.067 mmol) were dissolved in DMF (446 muL). PdCl2(dppf)-CH2Cl2 (2.187 mg, 2.68 mumol) was added and the reaction mixture was degassed by bubbling with argon for 15 minutes. Sodium carbonate (2 M, 26.8 muL, 0.054 mmol) was added and the reaction mixture was degassed for 5 minutes, then sealed and heated to 90 ¡ãC in the microwave for 30 minutes. The reaction mixture was diluted with DMF, filtered, and purified by preparative HPLC (Method D, 35 to 80percent B in 10 minutes) to give Example 5 (5.0 mg, 0.017 mmol, 37.2percent): 1H NMR (500MHz, METHANOL-d4) delta 8.89 (d, J=4.7 Hz, 1H), 8.59 (s, 1H), 8.13 (d, J=1.9 Hz, 1H), 8.10 (d, J=4.7 Hz, 1H), 7.84-7.52 (m, 2H), 2.64 (s, 3H); LC^MS: Method H, RT = 1.08 min, MS (ESI) m/z: 293.9 (M+H)+; Analytical HPLC Method B: 97.4percent purity

As the paragraph descriping shows that 55512-82-8 is playing an increasingly important role.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; RICHTER, Jeremy M.; ZHANG, Xiaojun; PRIESTLEY, Eldon Scott; (111 pag.)WO2018/13772; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27148-03-4,Benzo[d]isothiazole-3(2H)-thione 1,1-dioxide,as a common compound, the synthetic route is as follows.

General procedure: For 6: A solution of thiosaccharin (tsacH) (0.06 g, 0.307 mmol) in chloroform (8 cm3) was added to a solution of [PtCl2(kappa2-dppm)] (0.10 g, 0.154 mmol) in chloroform (10 cm3). A few drops of triethylamine were added and the resulting mixture was heated under reflex for 1 h. This produced a yellow solution was filtered off and reduced to half volume. Methanol (2 cm3) was added and the mixture was set a side to evaporate slowly at room temperature. The yellow crystalline solid thus formed was filtered off and dried in a vacuum oven (0.12 g, 91%)., 27148-03-4

The synthetic route of 27148-03-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Al-Jibori, Subhi A.; Al-Jibori, Mohamed H.S.; Hogarth, Graeme; Inorganica Chimica Acta; vol. 398; (2013); p. 117 – 123;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

Isothiazole-3-carboxylic acid, cas is 4576-90-3, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,4576-90-3

To a suspension of isothiazole-3-carboxylic acid (2 g, 15.49 mmol) in DCM at 0 C was added oxalyl dichloride (1.3 equiv.) followed by three drops of DMF. Bubbling commenced, and the reaction was warmed to 23 C after 10 min. The mixture was stirred for 3 h, then cooled to 0 C. N,0-dimethylhydroxylamine hydrochloride (1.3 equiv.) was added to the reaction, followed by triethylamine (3.5 equiv.) which was added dropwise via syringe over 10 min. Reactions was warm slowly to 23 C overnight, and stirred for a total of 15 h. Reaction mixture was diluted with IN HC1 solution and dichloromethane (1 :1 ratio). Layers were separated, and the aqueous layer was extracted with DCM (2x). Combined organic layers were dried over magnesium sulfate, filtered, and the solvent was removed in vacuo. Crude reside purified via silica gel chromatography (utilizing a hexane/ethyl acetate mix as eluent) to deliver the desired intermediate, N-methoxy-N-methylisothiazole-3-carboxamide (1 g, 38%> yield) as a pale yellow solid. NMR (400 MHz, CDCI3) delta ppm 8.67 (d, 1 H), 7.69 (br s, 1 H), 3.80 (s, 3 H), 3.46 (br s, 3 H).

As the rapid development of chemical substances, we look forward to future research findings about 4576-90-3

Reference£º
Patent; IRONWOOD PHARMACEUTICALS, INC.; BARDEN, Timothy Claude; SHEPPECK, James Edward; RENNIE, Glen Robert; RENHOWE, Paul Allan; PERL, Nicholas; NAKAI, Takashi; MERMERIAN, Ara; LEE, Thomas Wai-Ho; JUNG, Joon; JIA, James; IYER, Karthik; IYENGAR, Rajesh R.; IM, G-Yoon Jamie; (293 pag.)WO2016/44447; (2016); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

(3aS,6S,7aS)-8,8-Dimethylhexahydro-1H-3a,6-methanobenzo[c]isothiazole 2,2-dioxide, cas is 94594-90-8, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,94594-90-8

Take 30 g of the resulting intermediate, add 250 mL of dichloromethane. After stirring to clarify,37 g of camphorsulfonamide and 9. 6 g of N, N’-4-dimethylaminopyridine (DMAP) were added and the reaction was cooled to 10 ¡ã C. A solution of 75 g of N, N’-dicyclohexylcarbodiimide (DCC) and 50 mL of DCM was added dropwise, and the temperature of the dropping process was below 20 ¡ã C. After completion of the dropwise addition, the reaction was carried out at 20 ¡ã C to 25 ¡ã C for 18 hours. After completion of the reaction, the reaction solution was filtered and the resulting filtrate was washed once with 50 mL of water and once with 25 mL of saturated brine. After the dichloromethane phase was concentrated, 300 mL of n-heptane was added to precipitate a solid. Filtered and then dried to give 56 g of a solid, 99.8percent purity, 91percent yield.

As the rapid development of chemical substances, we look forward to future research findings about 94594-90-8

Reference£º
Patent; Dalian Honkai Chemical Development Co., Ltd; Sun, Liquan; Zhao, xinjun; Feng, Yan-shu; Gao, Hanrong; cornille, Fabrice; Canevotti, Renato; (12 pag.)CN106588841; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

4-Bromoisothiazole, cas is 24340-77-0, it is a common heterocyclic compound, the isothiazole compound, its synthesis route is as follows.,24340-77-0

To a reaction flask were added compound 30 (100 mg, 0.186 mmol), 4-bromoisothiazole (50 mg, 0.279 mmol), Pd(dppf)Cl2 (5 mg, 0.006 mmol) and sodium carbonate (60 mg, 0.558 mmol), 5 mL glycol dimethyl ether and 0.9 mL water were added, bubbled with nitrogen gas for 10 minutes, and the reaction was heated to 100 C in microwave and reacted for half an hour. After TLC detected the reaction was complete, the reaction was concentrated, purified by silica gel column chromatography to afford 78 mg of a product, yield: 85%. LC-MS(APCI): m/z = 494.7 (M+1)+. 1H NMR (400 MHz, CDCl3) delta 8.67 (s, 1H), 8.54 (d, J = 4.3 Hz, 2H), 7.96 (s, 1H), 7.91 (s, 1H), 7.67 (d, J = 8.8 Hz, 2H), 7.22 (d, J = 8.6 Hz, 2H), 3.43 – 3.34 (m, 1H), 3.34 – 3.21 (m, 2H), 3.18 (dd, J = 17.9, 9.0 Hz, 1H), 2.67 (s, 1H), 2.23 (s, 6H), 2.05 (d, J = 6.5 Hz, 1H), 1.76 (dd, J = 20.3, 10.0 Hz, 1H).

As the rapid development of chemical substances, we look forward to future research findings about 24340-77-0

Reference£º
Patent; Shenzhen Targetrx, Inc.; WANG, Yihan; ZHAO, Jiuyang; AL, Yixin; (51 pag.)EP3553057; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

87691-88-1, EXAMPLE 96; 1-f7-r2- (4-Benzordlisothiazol-3-vl-piperazin-1-yl)-ethvll-3, 4-dihvdro-1 H- isoauinolin-2-vl-2. 2, 2-trifluoro-ethanone methane sulfonate; A mixture of 3-piperazin-1-yl-benzo [d] isothiazole hydrochloride (0.4056 g, 1.417 mmol), 1- [7- (2-chloro-ethyl)-3, 4-dihydro-1 H-isoquinolin-2-yl]-2, 2, 2-trifluoro- ethanone (0.3755 g, 1.287 mmol), anhydrous sodium carbonate (0.3019 g, 2. 848 mmol) and potassium iodide (0.0259 g, 0.156 mmol) in acetonitrile (10 mL) was allowed to react at 175 C for 0.5 h in a microwave reactor. The reaction was cooled to ambient temperature. CH2CI2 and H20 were added and the solution was mixed well then poured into a phase separator. The organic layer was concentrated in vacuo to give an oil. The oil was eluted through a flash column (silica gel 60, 230- 400 mesh, 30-100% EtOAc in CH2CI2 gradient over 1 h) to give a white waxy/gummy solid. Yield : 0.4106 g (0.865 mmol, 67 %). The solid (0.405 g, 0.853 mmol) was taken up in THF (8.5 mL) and heated to 40 C. Methanesulfonic acid (55. 5 J. L, 0.855 mmol) was added and after 5 min, the reaction was allowed to cool to ambient temperature. The product was allowed to crystallize overnight. Hexanes were added to the reaction mixture and the solid was filtered and washed with hexanes. The wet solid was dried in a vacuum oven at 50 C to give a white/off-white crystalline solid as the mesylate salt. Anal. calculated for C24H25F3N40SsCH403S : C, 52.62 ; H, 5.12 ; N, 9.82. Found: C, 52.36, H, 4.98 ; N, 9. 69.’H NMR (400 MHz, CDCI3) 8 11.66 (s, 1 H), 7.84 (d, J=7. 42 Hz, 2 H), 7.52 (m, 2 H), 7.41 (m, 1 H), 7.12 (m, 2 H), 4.76 (m, 4 H), 4.17 (m, 2 H), 4.00 (m, 4 H), 3.82 (m, 2 H), 3.27 (m, 3 H), 2.91 (m, 6 H).

The synthetic route of 87691-88-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2005/66165; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.288-16-4,Isothiazole,as a common compound, the synthetic route is as follows.

Compound 1 (20 g, 0.235 mol) was added to dry 100 ml of diethyl ether under nitrogen atmosphere and stirred to dissolve,And then cooled to 0 C or lower, n-butyllithium (0.24 mol) was added dropwise thereto, and the temperature was kept below 0 C during the dropwise addition, and the reaction was carried out until the compound 1 was added.To the reaction solution was added bromine (0.5 mol), and the mixture was kept at 0 C or less during the dropping,After completion of the dropwise addition, the temperature was gradually raised to room temperature, and after stirring for half an hour, the hydrochloric acid solution was added thereto(2N, 500 ml).And the aqueous phase was extracted with ether (200 ml * 3) and discarded. The combined organic phase and sodium dithionite solution were washed(100 ml * 2), dried over anhydrous sodium sulfate, filtered and concentrated to dryness to give compound 2 as a yellow oil.In this step, the ether can also be replaced with a solvent such as methyl ether, dimethyl ether, tetrahydrofuran, 1,4-dioxane and the like., 288-16-4

288-16-4 Isothiazole 67515, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Tianjin Jinyao Group Co., Ltd.; Li Jing; He Guangjie; Yang Xinyi; Wang Shuli; Chen Liying; Hu Xiaoyun; Sun Liang; (37 pag.)CN106890177; (2017); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

936-16-3, 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

936-16-3, Step2. A mixture of compound 17 (300 mg, 1.18 mmol), 1 (240 mg, 1.42 mmol), Cs2CO3 (769 mg, 2.36 mmol), Cul (67 mg, 0.35 mmol) and 2-(dimethylamino)acetic acid hydrochloride (49 mg, 0.354 mmol) in dioxane (20 mL) was degassed and purged with N2 for (3X). The mixture was stirred at 100¡ãC for 12 hrs, filtered, and then diluted with ethyl acetate (50 mL). The solution was washed with saturated brine (50 mL), dried over anhydrous sodium sulfate, filtered, and concentrated to give 18 as a dark brown oil which was used without further purification.

The synthetic route of 936-16-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; NUMERATE, INC.; RAIMUNDO, Brian; KOLTUN, Elena S.; GRIFFIN, John; STANGELAND, Eric; (93 pag.)WO2018/49324; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10271-85-9,Isothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: The target compounds were synthesized using the procedure given in literature by refluxing aryl/heteroaryl acids with carbohydrazide 4a or 4b in phosphorous oxychloride. The reaction was monitored with the help of TLC to check its completion. After completion of reaction, the mixture was poured over crushed ice and allowed to precipitate. The precipitate was vacuum filtered, dried and recrystallized from methanol. Column chromatography was done on using n-hexane: ethylacetate mixture (7:3). Solvent was evaporated invacuo using rotary evaporator to obtain pure product.

10271-85-9, The synthetic route of 10271-85-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Rane, Rajesh A.; Bangalore, Pavankumar; Borhade, Sheetal D.; Khandare, Preeti K.; European Journal of Medicinal Chemistry; vol. 70; (2013); p. 49 – 58;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com