Day: September 24, 2020

936-16-3, 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

936-16-3, Example 86 2-[{1-(2,6-Dichlorophenyl)-5-isobutyl-1H-pyrazol-3-yl}methyl]-2,3-dihydro[d]isothiazole 1,1-dioxide (Compound 31) To a solution of N,N-dimethylformamide (1 mL) in 1,2-benzisothiazoline-1,1-dioxide (31.4 mg, 0.186 mmol) was added potassium carbonate (255 mg, 1.85 mmol) at room temperature, followed by stirring for 10 min. This solution was slowly added with drops of {1-(2,6-dichlorophenyl)-5-isobutyl-1H-pyrazol-3-yl}methyl bromide (73.3 mg, 0.202 mmol) in methylene chloride (2 mL), and stirred for a day at room temperature. When the reaction was completed as measured by TLC (Hexane:EtOAc=4:1), the reaction mixture was filtered through celite. The filtrate was neutralized with 1M HCl and an aqueous saturate sodium hydrogen carbonate solution. After extraction with ethyl acetate and water, the organic layer thus formed was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=2:1) to afford the title compound (61.9 mg, 74percent, white solid). M.P. 130.2-139.2¡ã C.; 1H NMR (300 MHz, CDCl3) delta 7.84 (d, J=7.7 Hz, 1H), 7.62-7.30 (m, 6H), 6.40 (s, 2H), 4.57 (s, 2H), 4.38 (s, 2H), 2.24 (d, J=7.3 Hz, 2H), 1.92-1.79 (m, 1H), 0.89 (d, J=6.6 Hz, 6H); 13C NMR (75 MHz, CDCl3) delta 148.3, 146.4, 135.4, 135.2, 135.1, 134.2, 131.0, 129.0, 128.8, 124.6, 121.4, 105.4, 49.6, 41.3, 34.8, 27.5, 22.5

936-16-3 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide 13638, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

87691-88-1, 119 ml (90.1 g, 0.698 mols, 3.21 molar equivalents) of N,N-diisopropylethylamine, 500 ml of acetonitrile and 55.8 g (0.218 mols, 1.0 molar equivalents) of 3-(l- piperazinyl) -1, 2-benzisothiazole hydrochloride (addition salt of compound of formula (III) and hydrochloric acid) are added into a beaker equipped with a magnetic stirrer. The resulting suspension is stirred for 10 minutes. At this point 50 g (0.217 mols, 1.0 molar equivalent) of 5- (2-chloroethyl) -6-chloro-l, 3-dihydro-indole-2- (2H) -one (Compound of formula (II) wherein X is chlorine) and 0.26 g (1.174 mmols, 0.008 molar equivalents) of NaI are added. The resulting brown suspension is charged into a 1 L reactor vessel, which is heated to 121-122 C (internal pressure increases to 200 kPa) for 25 hours. The reaction is cooled to room temperature and filtered. The solid is washed with acetonitrile, and 56 g of a wet solid are obtained. –> The resulting wet solid is stirred with 4 volumes of water at reflux temperature for 1 h to remove inorganic salts. The suspension is cooled to room temperature and filtered. The solid is washed with water. Ziprasidone base is obtained in 56% molar yield and the purity is 97.8% by HPLC.

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; MEDICHEM, S.A.; WO2006/34964; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.111248-89-6,1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide,as a common compound, the synthetic route is as follows.

c. 1-Methyl-1,3-dihydrobenzo[c]isothiazole-2,2-dioxide To a suspension of 1,3-dihydrobenzo[c]isothiazole-2,2-dioxide (280 mg, 1.655 mmol) and potassium carbonate (229 mg, 1.66 mmol) in DMF (5 mL) was added iodomethane (414 muL, 6.62 mmol). The reaction was stirred for 6 h at rt and was then quenched with a sat. NH4Cl solution. The reaction mixture was concentrated and purified by column chromatography (CyHex/acetone) to afford the title compound as a white solid (270 mg, 89%)., 111248-89-6

111248-89-6 1,3-Dihydrobenzo[c]isothiazole 2,2-dioxide 15536009, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Merck Patent GmbH; Cancer Research Technology, Ltd.; SCHIEMANN, Kai; BLAGG, Julian; MALLINGER, Aurelie; RINK, Christian; SEJBERG, Jimmy; HONEY, Mark; (139 pag.)US2016/16951; (2016); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

3,4-Dichloroisothiazol-5-ylcarboxylic acid (400 mg, 2.02 mmol) was dissolved in abs. dichloromethane (20 ml), and triethylamine (0.85 ml, 6.06 mmol) was added. After stirring at room temperature for 5 minutes, pyrrolidine-i-amine (209 mg, 2.42 mmol) and 2,4,6-tripropyl-1,3, 5,2,4,6-trioxatriphosphorinane 2,4,6-trioxide (1.80 ml, 3.03 mmol, 50percent solution in tetrahydrofuran) were added. The resulting reaction mixture was stirred at room temperature for a further 30 minutes, and then water, sat. sodium hydrogencarbonate solution and dichloromethane were added. The aqueous phase was repeatedly extracted vigorously with dichloromethane, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification of the resulting crude product by colunm chromatography gave 3,4-dichloro-N-(pyr- rolidin-i-yl)-i,2-thiazole-5-carboxamide in the form of a colorless solid (520 mg, 92percent of theory). ?H-NMR (400 MHz, CDC13 oe, ppm) 3.38-3.28 (m, 2H), 2.73-2.64 (m, 2H), 2.03-1.98 (m, 4H). 3,4-Dichloro-N-(pyrrolidin- 1 -yl)-i ,2- thiazole-5-carboxamide (120 mg, 0.45 mmol) was dissolved in abs. tetrahydroffiran (5 ml) under argon, and sodium hydride (40 mg, 1.99 mmol, 60percent purity) was added at room temperature. Stirring at room temperature for 30 minutes was followed by the addition of picolyl chloride (HC1 salt, 74 mg, 0.45 mmol), and the resulting reaction mixture was stirred under reflux conditions for approx. 3 hours. After cooling to room temperature, sat. sodium hydrogencarbonate solution, water and dichloromethane were added. The aqueous phase was repeatedly extracted vigorously with dichloromethane, and the combined organic phases were then dried over magnesium sulfate, filtered and concentrated. Final purification of the resulting crude product by colunm chromatography gave 3,4-dichloro-N-(pyridin-2-yl- methyl)-N-(pyrrolidin- 1 -yl)-i ,2-thiazole-5-carboxamide in the form of a colorless solid (112 mg, 69percent of theory). ?H-NMR (400 MHz, CDC13 oe, ppm) 8.62 (m, 1H), 7.71-7.67 (m, 1H), 7.53 (m, 1H), 7.33 (m, 1H), 5.15 (s, 2H), 4.18-4.13 (m, 2H), 3.71-3.66 (m, 2H), 2.30-2.24 (m, 2H), 2.13-2.08 (m, 2H).

18480-53-0, As the paragraph descriping shows that 18480-53-0 is playing an increasingly important role.

Reference£º
Patent; Bayer CropScience Aktiengesellschaft; FRACKENPOHL, Jens; BOJACK, Guido; BRUENJES, Marco; HELMKE, Hendrik; LEHR, Stefan; BRUECHNER, Peter; TIEBES, Joerg; MOSRIN, Marc; DITTGEN, Jan; SCHMUTZLER, Dirk; DESBORDES, Philippe; (92 pag.)US2018/206498; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,as a common compound, the synthetic route is as follows.

936-16-3, To a solution of {1-(tert-butyl)-5-(4-piperidin-1-yl-phenyl)-1H-pyrazol-3-yl}methanol (54.9 mg, 0.175 mmol) in methylene chloride (1.5 mL) were added PPh3 (93.1 mg, 0.355 mmol) and CBr4 (121 mg, 0.365 mmol) at 0¡ã C., followed by stirring at the same temperature for one hour to give {1-(tert-butyl)-5-(4-piperidin-1-yl-phenyl)-1H-pyrazol-3-yl}methyl bromide. When the reaction was completed as measured by TLC(Hexane:EtOAc=2:1), 1,2-benzisothiazoline-1,1-dioxide (27.3 mg, 0.161 mmol) in N,N-dimethylformamide (1.5 mL) was added dropwise. At the same temperature, potassium carbonate (228 mg, 1.65 mmol) was added, and the resulting solution was stirred for a day. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), water was added, after which extraction was carried out with ethyl acetate and brine. The organic layer thus formed was dried over anhydrous magnesium sulfate, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=4:1?1:1) to afford the title compound (15.2 mg, 20percent, white solid). (0324) M.P. 150.4-165.2¡ã C.; (0325) 1H NMR (300 MHz, CDCl3) delta 7.89 (d, J=7.9 Hz, 1H), 7.64-7.52 (m, 2H), 7.40 (d, J=7.1 Hz, 1H), 7.30-7.17 (m, 2H), 6.29 (d, J=8.7 Hz, 2H), 6.22 (s, 1H), 4.52 (s, 2H), 4.46 (s, 2H), 3.26-3.23 (brs, 4H), 1.79-1.74 (brs, 4H), 1.67-1.63 (brs, 2H), 1.49 (s, 9H); (0326) 13C NMR (75 MHz, CDCl3) delta 151.9, 144.4, 143.3, 135.4, 134.3, 132.5, 131.1, 128.9, 124.5, 123.7, 121.4, 114.9, 109.0, 61.0, 50.0, 41.4, 31.2, 25.7, 24.3

As the paragraph descriping shows that 936-16-3 is playing an increasingly important role.

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

677304-75-5, 6-Bromobenzo[d]isothiazole-3-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,677304-75-5

The following procedure was used to prepare benzisothiazole fer/-butyl esters:Di-ferz’-butyldicarbonate (128 mmol) was added to a suspension of 6-bromo-l,2- benzisothiazole-3-carboxyIic acid (46.5 mmol) and 4-dimethylaminopyridine (4.26 mmol) in tert-buty alcohol (40.0 mL) and tetrahydrofuran (40.0 mL) and the reaction mixture was heated at 65 0C for 16 hours. There was vigorous carbon dioxide evolution which gradually subsided as the mixture become homogeneous. The reaction mixture was concentrated and the residue was dissolved in dichloromethane. The dichloromethane solution was filtered through silica gel (ca. 5Og) and the eluent was concentrated to provide the ester product in 99% yield.The following ester was prepared using this method:tert-Butyl S-brorno-l^-benzisothiazole-S-carboxylate. tert-Butyl -bromo-l^-benzisothiazole-S-carboxylate.

677304-75-5 6-Bromobenzo[d]isothiazole-3-carboxylic acid 53401192, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; WO2007/56582; (2007); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

76857-14-2, Sodium 3-oxido-5-sulfidoisothiazole-4-carboxylate is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

76857-14-2, 4-carboxy-5-mercapto-3-hydroxy-isothiazolium trisodium (5) (24.31 g, 0.10 mol) was added to a solution of(About 65ml) hydrochloric acid stirring, the pH to 2-3, by adding 297mgDMAPStirring was continued for 20 minutes,Followed by addition of 50 ml of tert-butanol,6 ml of pyridine, Boc2O (21.83 g, 0.10 mol),In a dry environmentThe reaction was stirred at room temperature for 18 h. The reaction was complete by HPLC and the solvent was removed by rotary evaporation to give an oil which was chromatographed on ethyl acetate, The organic layer was dried over anhydrous magnesium sulfate, concentrated, and recrystallized from ethanol to give Intermediate 6 (24.11 g) in a molar yield87%, HPLC purity 99.2%.

76857-14-2 Sodium 3-oxido-5-sulfidoisothiazole-4-carboxylate 136151974, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Shandong Luoxin Pharmaceutical Group Co Ltd; Sun, Song; Xu, Qinyan; Chang, Zhicheng; (7 pag.)CN105646544; (2016); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

A mixture of the product from step C of Example 24 (2.2896 g, 8.488mmol), 3-piperazin-1-yl-benzo[d]isothiazole hydrochloride (2.4295 g, 8.489 mmol), potassium carbonate (2.3472 g, 16.983 mmol) and potassium iodine (0.1406 g, 0.847 mmol) were reacted in acetonitrile (14.0 mL) in a CEM MARS5 microwave reactor for 20 min at 175 C. The reaction was cooled to room temperature, diluted with H2O and the resulting solid was filtered and washed with H2O and hexanes. The solid was >98% pure by LC-MS. The while solid was dried in a vacuum over at 50 C to give 3.2518 g (7.185 mmol, 85%) of the titled compound as a white solid. >98 % pure by LC-MS. MS( APCI): (M+1)+ = 453.2.

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1,87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

E. ‘6-r2- (4-Benzordlisothiazol-3-vl-piperazin-1-vl)-ethvl-3, 4-dihvdro-2H- quinolin-1-vlT-(4-fluorophenvl)-methanone (97); A stirred mixture of the product of Step D (2.00 g, 6.29 mmol), 3-piperazin-1- yl-benzo [agisothiazole hydrochloride (9,1. 82 g, 7.12 mmol), K2CO3 (2.34 g, 16.9 mmol), and Nal (1.00 g, 6.67 mmol) in anhyd CH3CN (60 mL) under N2 was heated to reflux for 3 d, then allowed to cool. The mixture was diluted with EtOAc (300 mL), then washed twice with H20 (300 mL), once with saturated NaCI (100 mL), dried over Na2SO4, filtered, and the solvent was removed in vacuo. The residue was purified by column chromatography (silica gel (150 g), 40-60% EtOAc/hexanes containing 1% Et3N) to give the title compound (2.75 g, 87%) as a sticky oil and solid mixture. The product was dissolved in warm EtOAc (60 mL), then allowed to cool with stirring. A small amount of precipitate was observed after 30 min. The mixture was diluted with hexanes (120 mL) portionwise over 2 h. After stirring an additional hour, the precipitate was collected by suction filtration washing with hexanes, then dried in vacuo at 46 C for 3 d to give the title compound (1.71 g, 54%) as a white amorphous solid: mp 126-129 C ; 1H NMR (300 MHz, CDCl3) 8 7.91 (d, J= 8.1 Hz, 1 H), 7.82 (d, J= 8.1 Hz, 1 H), 7.47 (td, J= 7.6, 1.0 Hz, 1 H), 7.32-7. 41 (m, 3 H), 7.02 (br s, 1 H), 6.91-7. 00 (m, 2 H), 6.76 (dd, J = 8. 2,1. 5 Hz, 1 H), 6.60 (brd, J= 7.7 Hz, 1 H), 3.89 (t, J= 6.5 Hz, 2 H), 3.54-3. 63 (m, 4 H), 2.60-2. 87 (m, 10 H), 2.05 (p, J = 6.6 Hz, 2 H) ; IR (ATR) 2947,2835, 1634,1600, 1504,1374, 1271, 1227 cm-1 ; ESI MS m/z501 [C29H29FN40S + H]+; HPLC >99% (AUC), tR = 14.77 min. Anal. calcd. for C29H29FN40S : C, 69.57 ; H, 5.84 ; N, 11.19. Found: C, 69.36 ; H, 5.86 ; N, 11.03.

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2005/66165; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

7716-66-7,7716-66-7, 3-Chlorobenzo[d]isothiazole is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2)Preparation of 4-(1,2-benzisothiazol-3-yl)-1-piperazine3-chloro-(1,2-benzisothiazole) (14g, 200 mmol) and anhydrous piperazine (6.8g, 40 mmol) are placed in an egg type flask and heated at 125¡ãC for 24 hours.After completion of reaction, 52 ml of an ice-water mixture is added for quenching the reaction.The mixture is further added with 3.2g of 50percent NaOH solution, stirred 5 minutes and extracted with CH2Cl2 (50ml*3).The organic layer is washed with an ice-water mixture (50ml*2) and saturated saline (50ml*2), and dried over anhydrous MgSO4 to obtain 4-(1,2-benzisothiazol-3-yl)-1-piperazine.

As the paragraph descriping shows that 7716-66-7 is playing an increasingly important role.

Reference£º
Patent; Jiangsu Guohua Investment Co., Ltd; Shanghai Institute of Pharmaceutical Industry; EP2322520; (2011); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com