Day: September 14, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.,18480-53-0

To a solution of S^-dichloroisothiazole-delta-carboxylic acid (4.0Og, 20.1 mmol) in dichloromethane (75 ml_), cooled with an ice-brine bath, was added N,N-dimethylformamide (78 mul_, 1 mmol) followed dropwise by oxalyl chloride (1.94 ml_, 22.2 mmol). After stirring at room temperature for 2h, meanwhile gas evolution had completely stopped, all volatiles were removed in vacuo to affor the crude acid chloride (4.30 g).

18480-53-0 3,4-Dichloroisothiazole-5-carboxylic acid 49837, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; BAYER CROPSCIENCE SA; WO2009/130193; (2009); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.822-82-2,Isothiazole-4-carboxylic acid,as a common compound, the synthetic route is as follows.,822-82-2

To a solution of l-[(5R)-4-[methyl(tetrahydropyran-4-yl)amino]-5-oxido-6,7- dihydrothieno[3,2-d]pyrimidin-5-iunn-2-yl]azetidin-3-ol (2.5 g, 7.4 mmol) in DCM (50 mL) was added 4-isothiazolecarboxylic acid ( 1.2 g, 9.6 mmol), DMAP (90 mg, 0.74 mmol) and EDAC ( 1.8 g, 9.6 mmol). The mixture was stirred at room temperature overnight before it was concentrated in vacuo. The residue was purified by column chromatography (DCM/MeOH gradient 20 : 1 to 10 : l(Rf= 0.47 (MeOH/DCM 1 : 10))) and subsequently crystallized twice from n-butyl acetate. The title compound was obtained as colorless crystalline material. 1H NMR (DMSO-d6) delta: 9.81 (s, 1H), 8.99 (s, 1H), 5.59 – 5.38 (m, 1H), 4.94 – 4.75 (m, 1H), 4.47 (dd, J = 10.4, 6.6 Hz, 2H), 4.21 – 4.05 (m, 2H), 4.04 – 3.88 (m, 2H), 3.56 – 3.33 (m, 3H), 3.27 – 3.13 (m, 4H), 3.10 – 2.93 (m, 2H), 1.95 – 1.75 (m, 2H), 1.71 – 1.48 (m, 2H). HPLC-Retention time (XE Metode 7 CM) : 1.89 minutes. Detected “M + l”-mass: 450.12.

The synthetic route of 822-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; LEO PHARMA A/S; LARSEN, Jens; (110 pag.)WO2019/57806; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18480-53-0,3,4-Dichloroisothiazole-5-carboxylic acid,as a common compound, the synthetic route is as follows.

3,4-Dichloroisothiazole-5-carboxylic acid (CAS 18480-53-0, 34.8 mg, 0.18 mmol) was dissolved in DMF (200 iL). HBTU (83 mg, 0.22 mmol) and TEA (61.1 iL, 0.44 mmol) were added. The solution was stirred for 6 mm and then 4-(2-amino-3-methylbutanoyl)benzonitrile hydrochloride (Example 49b, 35 mg, 0.15 mmol) in DMF (400 iL) and TEA (61.1 iL, 0.44 mmol) was added. The reaction mixture was stirred at rt for 1 h and then purified by preparative HPLC to give 3,4-dichloro-N-(1-(4-cyanophenyl)-3-methyl-1-oxobutan-2-yl)isothiazole-5-carboxamid (15 mg, 28percent).1H NMR (500 MHz, CDCI3) 5 ppm 0.87 (d, 3 H) 1.12 (d, 3 H) 2.26 – 2.36 (m, 1 H) 5.75 (dd, 1 H)7.74 (d, 1 H) 7.86 (d, 2 H) 8.12 (d, 2 H).MS (ESI) m/z 379.7 [M-H], 18480-53-0

As the paragraph descriping shows that 18480-53-0 is playing an increasingly important role.

Reference£º
Patent; ACTURUM LIFE SCIENCE AB; LINDE, Christian Erik; PAULSEN, Kim; SOHN, Daniel; SVENSSON, Mats A; VALLIN, Karl S A; WEIGELT, Dirk; MINIDIS, Alexander; WO2014/184235; (2014); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7716-66-7,3-Chlorobenzo[d]isothiazole,as a common compound, the synthetic route is as follows.

7716-66-7, PREPARATION 3 3-(1-Piperazinyl)-1,2-benzisothiazole ¡¤ hydrochloride Anhydrous piperazine (49.4 g, 0.57 mol) and t-butanol (10 mL) were added to a dry, 300 mL round bottom flask equipped with a mechanical stirrer, thermometer, condenser topped with a nitrogen inlet, and pressure-equalizing dropping funnel. After the flask was purged with nitrogen, it was heated to 100 C. in an oil bath. A solution of 3-chloro-1,2-benzisothiazole (19.45 g, 0.11 mol) in t-butanol (10 mL) was added to the addition funnel, and then slowly added to the reaction flask over 20 minutes to moderate an exothermic reaction (112-118 C.). Once addition was complete the yellow solution was heated to reflux (121 C.) and then maintained at reflux for 24 hours. Thin-layer chromatography showed that the reaction was complete. The reaction mixture was cooled to 85 C. and 120 mL of water was added. The hazy solution was filtered and the filter cake rinsed with 60 mL of t-butanol/water (1:1) solution. The pH of the combined filtrate and wash was adjusted to 12.2 with 50% aqueous caustic. The aqueous solution was extracted with toluene (200 mL), the layers were separated, and the aqueous layer was extracted with fresh toluene (100 mL). The combined toluene layers were washed with water (75 mL), and then the toluene solution was concentrated in vacuo at 48 C. to 90 mL. Isopropanol (210 mL) was added to the concentrate and then the pH was slowly adjusted to 3.8 with 7.6 mL of concentrated hydrochloric acid. The resulting slurry was cooled to 0 C., granulated for 45 min, and then filtered. The filter cake was washed with cold isopropanol (50 mL) and then dried in vacuo at 40 C. to afford 23.59 g (80% yield) of 3-(1-piperazinyl)-1,2-benzisothiazole hydrochloride as an off white solid.

7716-66-7 3-Chlorobenzo[d]isothiazole 598190, aisothiazole compound, is more and more widely used in various fields.

Reference£º
Patent; Pfizer Inc.; US5935960; (1999); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3,4-Dichloroisothiazole-5-carboxylic acid,cas is 18480-53-0, mainly used in chemical industry, its synthesis route is as follows.,18480-53-0

Preparation of the Starting Material At room temperature, 146 g (1.23 mol) of thionyl chloride are added dropwise with stirring over a period of 5 minutes to 8.92 g (0.045 mol) of 3,4-dichloro-isothiazole-5-carboxylic acid. Four drops of dimethylformamide are then added and the reaction mixture is heated under reflux for one hour. The reaction mixture is subsequently cooled to room temperature and concentrated under reduced pressure. In this manner, 12.19 g of 3,4-dichloro-isothiazole-5-carbonyl chloride are obtained in the form of an orange oil.

As the rapid development of chemical substances, we look forward to future research findings about 18480-53-0

Reference£º
Patent; Bayer Aktiengesellschaft; US6277791; (2001); B1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24340-77-0,4-Bromoisothiazole,as a common compound, the synthetic route is as follows.

To a reaction flask were added compound 41 (100 mg, 0.19 mmol), 4-bromoisothiazole (50 mg, 0.27 mmol), Pd(dppf)Cl2 (5 mg, 0.006 mmol) and sodium carbonate (60 mg, 0.558 mmol), 5 mL glycol dimethyl ether and 0.9 mL water were added, bubbled with nitrogen gas for 10 minutes, and the reaction was heated to 100 C in microwave and reacted for half an hours. After TLC detected the reaction was complete, the reaction was concentrated, purified by silica gel column chromatography to afford 58 mg of a product, yield: 63%. LC-MS(APCI): m/z = 485.3 (M+1)+. 1H NMR (400 MHz, CDCl3) delta 10.23 (s, 1H), 9.09 (s, 1H), 8.77 (d, J = 2.0 Hz, 1H), 8.72 (s, 1H), 8.10 (d, J = 2.0 Hz, 1H), 7.87 (d, J = 9.0 Hz, 2H), 7.34 (d, J = 8.7 Hz, 2H), 5.47 (d, J = 3.5 Hz, 1H), 4.94 (d, J = 51.5 Hz, 1H), 4.18 (s, 1H), 3.64 (ddd, J = 41.8, 13.5, 3.1 Hz, 1H), 3.43 – 3.38 (m, 1H), 3.02 (d, J = 11.9 Hz, 1H).

24340-77-0, As the paragraph descriping shows that 24340-77-0 is playing an increasingly important role.

Reference£º
Patent; Shenzhen Targetrx, Inc.; WANG, Yihan; ZHAO, Jiuyang; AL, Yixin; (51 pag.)EP3553057; (2019); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3-Chlorobenzo[d]isothiazole,cas is 7716-66-7, mainly used in chemical industry, its synthesis route is as follows.,7716-66-7

Preparation Example 20: 3-(4-(Benzo[d]isothiazoI-3-yl)piperazin-l- yl)propan-l-amine dihydrochloride; A mixture of piperazine (10.2 g, 0.118 mmol) and 3-chloro-l ,2- benzisothiazole (4.0 g, 0.024 mmol) in t-BuOH (4 mL) was refluxed overnight. The reaction mixture was poured into water (100 mL) and extracted with toluene (200 mL). The organic phase was dried over MgSO4 and evaporated until about 20 mL remained, under vacuum. The resulting suspension was cooled at 0-5 0C overnight. The precipitate was filtered and dried under vacuum to provide 3-(piperazin- l-yl)benzo[d]isothiazole as an intermediate (3.36 g, 15.4 mmol, 65 percent). MH+ 220A mixture of 3-(piperazin-l-yl)benzo[-i]isothiazole (1.75 g, 8.0 mmol), N-(3-bromopropyl)-phthalimide (1.96 mmol, 7.3 mmol) and K2CO3 (2.21 g, 16.0 mol) in DMF (10 mL) was stirred at 80 0C for 3 hours. The reaction mixture was poured into water (100 mL) and extracted with ethyl acetate (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was further purified by flash column chromatography to provide 2-(3-(4- (benzo[d]isothiazol-3-yl)piperazin-l-yl)propyl)isoindoline-l ,3-dione as an intermediate (1.49 g, 3.67 mmol, 50 percent).To a solution of 2-(3-(4-(benzo[y]isothiazol-3-yl)piperazin-l- yl)propyl)isoindoline- l ,3-dione (1.49 g, 3.67 mmol) in EtOH (25 mL) was added Hydrazine monohydrate (2.5 mL). The mixture was stirred at 80 0C for 1-2 hours and cooled to room temperature. The reaction mixture was poured into water (100 mL) and extracted with DCM (150 mL). The organic phase was dried over MgSO4 and evaporated under vacuum. The residue was redissolved in ether (20-30 mL) and HCl solution (3 mL, 2M in ether) was added to the solution. The resulting precipitate was collected on a filter funnel and dried under vacuum to provide the title compound as HCl salt form (1.1 g, 3.15 mmol, 86 percent).1R NMR (400 MHz, CD3OD3) delta 8.04 (d, J = 8.4 Hz, IH), 7.94 (d, J = 8.0 Hz, IH), 7.55 (t, J = 7.2 Hz, IH), 7.45 (t, J = 7.6 Hz, IH), 4.24- 4.14 (br, 2H), 3.85 (t, J = 7.2 Hz, IH), 3.76-3.66 (br, 2H), 3.59-3.32 (m, 9H), 3.08 (t, J = 7.6 Hz, IH), 2.34-2.30 (m, IH), 2.25-2.17 (m, 2H).MH+ 277

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; GREEN CROSS CORPORATION; LEE, Jinhwa; KANG, Suk Youn; PARK, Eun-Jung; SONG, Kwang-Seop; KIM, Min Ju; SEO, Hee Jeong; LEE, Suk Ho; KIM, Jeongmin; PAE, Ae Nim; PARK, Woo-Kyu; WO2010/38948; (2010); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 3-Chlorobenzo[d]isothiazole,cas is 7716-66-7, mainly used in chemical industry, its synthesis route is as follows.,7716-66-7

(1) A dry 2-neck 500mL RBF was charged with 21percent sodium ethanolate (46.2 ml, 124 mmol), diluted with 151 mL absolute EtOH, cooled in an ice bath and treated dropwise with diethyl malonate (18 mL, 118 mmol) under an atmosphere of nitrogen. After stirring for 20 minutes, the ice bath was removed and 3-chlorobenzo[d]isothiazole (20.0 g, 118 mmol) was added in one portion and stirred for 24 hours. The reaction solution was quenched with water, extracted with ether and treated with excess 4M HCl/dioxane. The resulting pinkish-white precipitate was filtered off, suspended in water, basified with Na2CO3, extracted with ether, washed with water and brine, dried over sodium sulfate, filtered and concentrated to yellow solids (?20g) which were recrystallized from ethanol/water and dried in a vacuum oven at 60¡ãC for 3 hrs affording 19.9 g (76percent yield) of the ethyl 3-aminobenzo[b]thiophene-2-carboxylate.

As the rapid development of chemical substances, we look forward to future research findings about 7716-66-7

Reference£º
Patent; Universal Display Corporation; Joseph, Scott; Boudreault, Pierre-Luc T.; Dyatkin, Alexey Borisovich; Li, David Zenan; Xia, Chuanjun; Yamamoto, Hitoshi; EP2910555; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.677304-75-5,6-Bromobenzo[d]isothiazole-3-carboxylic acid,as a common compound, the synthetic route is as follows.

677304-75-5, The following procedure was used to prepare benzisothiazole tert-butyl esters: Di-tert-butyldicarbonate (128 mmol) was added to a suspension of 6-bromo-1,2-benzisothiazole-3-carboxylic acid (46.5 mmol) and 4-dimethylaminopyridine (4.26 mmol) in tert-butyl alcohol (40.0 mL) and tetrahydrofuran (40.0 mL) and the reaction mixture was heated at 65 C. for 16 hours. There was vigorous carbon dioxide evolution which gradually subsided as the mixture become homogeneous. The reaction mixture was concentrated and the residue was dissolved in dichloromethane. The dichloromethane solution was filtered through silica gel (ca. 50 g) and the eluent was concentrated to provide the ester product in 99% yield.

The synthetic route of 677304-75-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Schumacher, Richard; Danca, Mihaela Diana; Ma, Jianguo; Herbert, Brian; Nguyen, True Minh; Xie, Wenge; Tehim, Ashok; US2007/78147; (2007); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

A common heterocyclic compound, the isothiazole compound, name is 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,cas is 936-16-3, mainly used in chemical industry, its synthesis route is as follows.,936-16-3

To a solution of {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methanol (19.4 mg, 0.078 mmol) in methylene chloride (1 mL) were added PPh3 (42.8 mg, 0.163 mmol) and CBr4 (66.3 mg, 0.200 mmol) at 0¡ã C., followed by stirring at the same temperature for 30 minute to give {5-(4-fluorophenyl)-1-isobutyl-1H-pyrazol-3-yl}methyl bromide. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), drops of 1,2-benzisothiazoline-1,1-dioxide (24.3 mg, 0.078 mmol) N,N-dimethylformamide (1.5 mL) were slowly added to the solution. (0338) Then, potassium carbonate (113 mg, 0.816 mmol) were added at the same temperature, and the resulting solution was stirred for a day. When the reaction was completed as measured by TLC (Hexane:EtOAc=2:1), water was added, after which extraction was carried out with ethyl acetate and brine. The organic layer thus formed was dried over anhydrous magnesium sulfate, filtered, and concentrated in vacuo. The concentrate was purified by column chromatography (Hexane:EtOAc=2:1) to afford the title compound (19.2 mg, 62percent percent, white solid). (0339) M.P. 110.8-118.2¡ã C.; (0340) 1H NMR (300 MHz, CDCl3) delta 7.61-7.52 (m, 2H), 7.46-7.33 (m, 4H), 7.18-7.12 (m, 2H), 6.41 (s, 1H), 4.56 (s, 2H), 4.41 (s, 2H), 3.91 (d, J=7.5 Hz, 2H), 2.26-2.08 (m, 1H), 0.80 (d, J=6.7 Hz, 6H); (0341) 13C NMR (75 MHz, CDCl3) delta 146.0, 144.5, 136.8, 135.2, 134.0, 133.0, 132.6, 131.0, 130.8, 129.2, 129.1, 124.8, 124.5, 121.4, 115.9, 115.6, 106.3, 56.7, 49.9, 45.7, 41.2, 29.6, 19.8

As the rapid development of chemical substances, we look forward to future research findings about 936-16-3

Reference£º
Patent; KOREA INSTITUTE OF SCIENCE AND TECHNOLOGY; NAM, Ghil Soo; CHOI, Kyung Il; KIM, Jung Hyun; PAE, Ae Nim; HONG, Jin Ri; LEE, Jae Kyun; (30 pag.)US2015/329533; (2015); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com