Day: August 17, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,as a common compound, the synthetic route is as follows.

Step 2. Solution of 1 (97 mg, 0.053 mmol) in DMF (4 mL) was cooled to 0¡ãC and NaH (13.9 mg, 0.058 mmol) was added. The mixture was stirred at 0¡ãC for 30 minutes followed by addition of 10 (100 mg, 0.48 mmol). The solution was allowed to stir 15 hours at 0¡ãC. The resulting mixture was poured into water (20 mL) and stirred for 10 minutes. The aqueous phase was extracted with ethyl acetate (30 mL). The combined organic layer was washed with brine (20 mL), dried with anhydrous sodium sulfate, filtered, and concentrated. Purification with prep- HPLC (0.04percentNH3.H2O/ ACN/ H20 system) resulted in Compound 114 (20 mg) as a white solid. 1H NMR (DMSO-d6, 400MHz) delta 8.56 (d, 1H), 8.51-8.46 (m, 2H), 8.06 (d, 1H), 7.88- 7.82 (m, 1H), 7.81-7.67 (m, 3H), 7.50 (dd, 8.2 Hz, 1H), 7.09 (d, 1H), 5.17 (s, 2H); LCMS (ESI+): m/z 341 (M+H).

The synthetic route of 936-16-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; NUMERATE, INC.; RAIMUNDO, Brian; KOLTUN, Elena S.; GRIFFIN, John; STANGELAND, Eric; (93 pag.)WO2018/49324; (2018); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

A mixture of 8 (700 mg, 2.2 mmol), 9 (817 mg, 3.2 mmol), Nal (651 mg, 4.3 mmol), and triethylamine (1.5 mL, 10.9 mmol) in acetonitrile (50.0 mL), was heated to reflux for 48 h, and allowed to cool. The mixture was concentrated to dryness in vacuo. The residue was suspended in water (50 mL) and sonicated for 5 min, and then filtered through a sintered glass frit. The solid was rinsed with additional water, dried under vacuum, and purified by chromatography (silica gel, gradient 3 – 5 % MeOH in CH2CI2) to provide compound 10 (630 mg, 63 %) as a white solid. 1H NMR (400 MHz, CDCl3): delta 10.75 (br s, 1H), 7.93 (d, 1H), 7.80 (d, 1H), 7.50-7.43 (m, 1H), 7.40-7.35 (m, 1H), 7.29-7.22 (m, 1H), 7.10 (d, 1H), 6.98 (s, 1H), 4.10 (t, 2H), 3.61-3.52 (m, 4H), 3.15 (t, 2H), 3.00 (t, 2H), 2.80-2.72 (m, 4H), 2.70 (t, 2H), 2.29-2.20 (m, 2H), 2.10-2.02 (m, 2H), MS m/z 460.97 [C26H28N4O2S + H]+

87691-88-1 3-Piperazinobenzisothiazole hydrochloride 11521711, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2004/26864; (2004); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

PREPARATION 7 6-r2- (4-Benzordlisothiazol-3-vl-piperazin-1-vl)-ethvll-2a, 3, 4, 5-tetrahydro-1 H- benzoRcdlindol-2-one; A 20 mL reaction vial was charged with 0.47 g (2 mmol, 1 eq) 6- (2-chloro- ethyl)-2a, 3,4, 5-tetrahydro-1 H-benzo [cd] indol-2-one, 0.51 g 3-piperazin-1-yl-benzo [d] – iso-thiazole hydrochloride, and 5 mL of 1 M aqueous sodium carbonate (Na2CO3) and heated to 100C for 60 h. The solid was filtered, washed with water and dried in vacuo overnight. The resulting solid was purified by medium pressure liquid chromatography (MPLC) (ethyl acetate (EtOAc) eluent) to give 0.36 g (43 % yield) of the desired material as a white solid. 1H NMR (400 MHz, CDCl3) 8 ppm 1.3 (qd, J=12. 3,3. 5 Hz, 1 H) 1.9 (m, 1 H) 2.2 (m, 1 H) 2.4 (dt, J=12. 2,4. 4 Hz, 1 H) 2.6 (m, 3 H) 2.8 (m, 6 H) 3.3 (dd, J=11. 8,5. 0 Hz, 1 H) 3.6 (s, 4 H) 6.6 (d, J=7. 6 Hz, 1 H) 7.0 (d, J=7. 8 Hz, 1 H) 7.3 (m, 1 H) 7.5 (m, 1 H) 7.8 (d, J=8. 1 Hz, 1 H) 7.9 (d, J=8.1 Hz, 1 H) 8.2 (s, 1 H). MS (APCI), (M+1) + = 292,419.

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

Reference£º
Patent; WARNER-LAMBERT COMPANY LLC; WO2005/66165; (2005); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.936-16-3,2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide,as a common compound, the synthetic route is as follows.

Example 27. 4-(1,1-Dioxido-1,2-benzisothiazol-2(3H)-yl)-2-piperazin-1-ylquinazoline. 2,4-Dichloroquinazoline (60 mg, 0.30 mmol), 2,3-dihydro-l,2-benzisothiazole 1,1-dioxide (50 mg, 0.30 mmol) and sodium hydride (11 mg, 0.45 mmol) were dissolved in anhydrous DMF (2 ml). The mixture was heated at 60¡ã C under nitrogen atmosphere for 10 min. Piperazine (52 mg, 0.60 mmol) was added and the heating was continued for 10 minutes. 5 The reaction mixture was diluted with water (0.5 ml), filtered and purified by preparative HPLC to give the acetate of the title compound as a solid (36 mg, 27 percent). 1H NMR (400 MHz, MeOD-d4) delta ppm 8.49 (1 H3 d) 7.58 – 7.87 (6 H, m) 730 – 7.38 (1 H, m) 5.58 (2 H, s) 4.03 – 4.16 (4 H3 m) 3.15 – 3.26 (4 H3 m); ESI-MS m/z M+H+ 382.

936-16-3 2,3-Dihydrobenzo[d]isothiazole 1,1-dioxide 13638, aisothiazole compound, is more and more widely used in various.

Reference£º
Patent; ASTRAZENECA AB; WO2007/108743; (2007); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.87691-88-1,3-Piperazinobenzisothiazole hydrochloride,as a common compound, the synthetic route is as follows.

2. Preparation of ZPR in glycerol In a three necked flask was charged BITP HC1 (25g, 0. 098 mol), glycerol (62 ml), Na2C03 (13g) and the mixture was stirred for 10 minutes. CEI (5.9g) was added and the reaction mixture was heated for 3h at 115-120C. After 3h, the reaction was almost complete; after cooling to room temperature the solid was filtrated and was triturated in water and dried. The dried solid weights 42 g and the purity was 89.03%.

The synthetic route of 87691-88-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2005/40160; (2005); A2;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a flask equipped with mechanical stirrer, thermometer, condenser and nitrogen inlet was added 6-chloro-5-(2-chloroethyl)-l,3-dihydro-2H-indol-2- one (21.6 g, 94 mmol), 3-(l-piperazinyl)-l,2-benzoisothiazole hydrochloride (24 g, 94 mmol), sodium carbonate (29.9 g, 282 mmol) and l-methyl-2- pyrrolidinone (NMP) (96 ml) and the mixture was heated to 130-1350C under nitrogen for about 24 hrs. The mixture was cooled to 40-450C and poured into water. The suspension was cooled and the product was collected by filtration on a Buchner funnel, the filter cake was rinsed with water at 20- 250C and the damp product was transferred to a drying oven and dried in vacuo. This afforded 34.2 g (88.2% yield) of crude ziprasidone. The IR (KBr) and NMR spectra were consistent with those of reference ziprasidone.

As the paragraph descriping shows that 87691-88-1 is playing an increasingly important role.

Reference£º
Patent; APOTEX PHARMACHEM INC.; WO2006/47893; (2006); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

4576-90-3, Isothiazole-3-carboxylic acid is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 1. Preparation of tert-butyl isothiazol-3-ylcarbamate To a slurry of isothiazole-3-carboxylic acid (5.0 g, 38.7 mmol) in tert-butanol (194 mL) was added triethylamine (4.3 g, 42.6 mmol) followed by diphenylphosphoryl azide (11.9 g, 43.3 mmol). The reaction mixture was heated to reflux for 9 hours. Concentration under reduced pressure provided a residue which was dissolved in ethyl acetate (300 mL). The organic layer was washed with water (100 mL), 1 N sodium hydroxide solution (50 mL), water (100 mL), and brine (50 mL). The organic layer was dried over anhydrous magnesium sulfate, filtered, and the filtrate concentrated in vacuo. Purification of the residue by column chromatography, eluting with a gradient of 0 to 10% of ethyl acetate in heptane, provided the title compound as a colorless solid (6.16 g, 79% yield): 1H NMR (300 MHz, CDCl3) delta 9.03-8.98 (m, 1H), 8.58 (d, J=4.9 Hz, 1H), 7.70 (d, J=4.9 Hz, 1H), 1.53 (d, J=0.7 Hz, 9H).

#N/A

Reference£º
Patent; Xenon Pharmaceuticals Inc.; Andrez, Jean-Christophe; Burford, Kristen Nicole; Dehnhardt, Christoph Martin; Focken, Thilo; Grimwood, Michael Edward; Jia, Qi; Lofstrand, Verner Alexander; Wesolowski, Steven Sigmund; Wilson, Michael Scott; US2020/71313; (2020); A1;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com

87691-88-1, 3-Piperazinobenzisothiazole hydrochloride is a isothiazole compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The above intermediate IV (0.01 mol) and the hydrochloride salt of the piperazine compound (V) (0.01 mol)Dissolved in DMF (100 mL) and added K2CO3 (0.02 mol).According to the general operation three,Preparation of 3-(4-(2-(5-fluoro-1H-indol-3-yl)ethyl)piperazin-1-yl)benzo[d]isothiazole (VI-1)Hydrochloride (white solid) 2.5 g, yield 60%.

The synthetic route of 87691-88-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shanghai Pharmaceutical Industry Institute; China Pharmaceutical Industry Zongyuan; Li Jianqi; Gu Zhengsong; Zhou Ainan; Xiao Ying; (26 pag.)CN109467554; (2019); A;,
Isothiazole – Wikipedia
Isothiazole – ScienceDirect.com